How to put my order in?
Click on the link in post #835. It will take you to the Modushop page (1HFTOXIC) for the chassis. You can choose chassis only or complete kit.
If the page comes up in Italian, click the flag near the top of the page and change it to English. Ordering is pretty straightforward from there.
Hi pico, I have everything ready to go for the 1st chassis build which will be a Stasis build based on the new NP FE design and the mighty ZM's OS boards. PCB's will be populated and tested by the time we get the chassis here.
What are other members who are purchasing this chassis planning to build?
What are other members who are purchasing this chassis planning to build?
Haha, I mean my diyAudio nickname
I got your back James Will update the list shortly!
Hi pico, I have everything ready to go for the 1st chassis build which will be a Stasis build based on the new NP FE design and the mighty ZM's OS boards. PCB's will be populated and tested by the time we get the chassis here.
What are other members who are purchasing this chassis planning to build?
Awesome.
That will be a sweet amp.
Not sure if these will be useful, but I have some monster 35V 220,000uF caps.
E32D350HLN224MDB7M
http://www.digikey.com/product-deta...D350HLN224MDB7M/E32D350HLN224MDB7M-ND/3998211
I think it could be the same as this one http://www.digikey.com/en/products/detail/united-chemi-con/E32D350HLN224MDB7U/13248072
http://www.digikey.com/product-deta...D350HLN224MDB7M/E32D350HLN224MDB7M-ND/3998211
I think it could be the same as this one http://www.digikey.com/en/products/detail/united-chemi-con/E32D350HLN224MDB7U/13248072
Last edited:
They are not physically as big as I thought they would be pico, so a good size. Do you have any extras you are not going to use by any chance - like 4 off?
Count now up to 23 for the pico chassis, get your orders in for those who have not done it yet - 40 needed for manufacture to start.
Count now up to 23 for the pico chassis, get your orders in for those who have not done it yet - 40 needed for manufacture to start.
Hi pico, I have everything ready to go for the 1st chassis build which will be a Stasis build based on the new NP FE design and the mighty ZM's OS boards. PCB's will be populated and tested by the time we get the chassis here.
What are other members who are purchasing this chassis planning to build?
The short list is to try them with my Burning Amp configurations with more output devices. Balanced monoblocks / SE stereo with 12 devices per phase / channel and toy with bias. Complimentary (BA-2) and Single-Ended (BA-1) output stages with the BA-3 input stage. I've been waiting to put the new boards in. Right now, I have just the "standard" 6 devices per side.
Singing Bush - Non Schade. Schade if it will handle it. Boards are waiting for their new home.
Later down the road - Stasis and/or the SIT-3x. I'm also fascinated by another of ZMs "X" configurations.
Essentially anything that comes along where the sink temps are above 'Bloody Hot' and/or building space gets tighter. If heat is an issue for any of them, I have 5U components that I'll swap in to make 5U 500s from the combination. I love the modularity of these chassis.
Can't wait!!! Thanks again to Pico and Gianluca.
Hi pico, I have everything ready to go for the 1st chassis build which will be a Stasis build based on the new NP FE design and the mighty ZM's OS boards. PCB's will be populated and tested by the time we get the chassis here.
What are other members who are purchasing this chassis planning to build?
I’m building the Stasis w the Susy FE. I know Zen Mod told me to wait but for learning, nothings better than hands on experience so I may not wait and try myself. If I fry some components, so be it
- Home
- Amplifiers
- Pass Labs
- Ultimate 4U 500mm Chassis - Who is interested?