Is that a SCHURTER (1241.6834.1124000) mains switch you have implemented? Very nice and outstanding build.
Question For WaterW about softstart pcb
Hello Walter,
as some others here, I am inspired with your builds.
in your last build, showcase http://www.diyaudio.com/forums/pass-labs/166784-pictures-your-diy-pass-amplifier-314.html#post4302570
You use a softstart board, this looked familiar, and found some on ebay, what is your experience with this board?
did you buy on ebay?, or have you found the board at another source?, when other source are you willing to share the source?
Grtz
Bert
Hello Walter,
as some others here, I am inspired with your builds.
in your last build, showcase http://www.diyaudio.com/forums/pass-labs/166784-pictures-your-diy-pass-amplifier-314.html#post4302570
You use a softstart board, this looked familiar, and found some on ebay, what is your experience with this board?
did you buy on ebay?, or have you found the board at another source?, when other source are you willing to share the source?
Grtz
Bert
Attachments
Hi Carsten,
Looks very nice. A bit similar to the case me and some friends are designing for our projects.
I was wondering how the labeling / text on the back panel was done. Could you enlighten us?
Thank you,
Maarten
F5Tc (teabag boards)
After asking questions, some pictures from my F5Tc build.
in some of the pictures, top right, the previous build (F5) backplane shows
sorry, uploading multiple images give me the status message attached
I want to upload 6 JPG images, each about 1.4MB, total 9.3Mb
After asking questions, some pictures from my F5Tc build.
in some of the pictures, top right, the previous build (F5) backplane shows
sorry, uploading multiple images give me the status message attached
I want to upload 6 JPG images, each about 1.4MB, total 9.3Mb
Attachments
Last edited:
Aleph 2
Our diy member bokiooo7 from Serbian baby diya made some pornographic images (18+):
He says with these Aleph2 monoblocks he finished his search for a perfect amplifier, although he is very young man 😀
More info here> Aleph 2 monoblokovi - Solid State - diyAudio.rs
Our diy member bokiooo7 from Serbian baby diya made some pornographic images (18+):
He says with these Aleph2 monoblocks he finished his search for a perfect amplifier, although he is very young man 😀
More info here> Aleph 2 monoblokovi - Solid State - diyAudio.rs
congrats
Hi acamilicko,
cool front and top plate and power supply work, wish I had access to some proper metal working tools.
Bert
Hi acamilicko,
cool front and top plate and power supply work, wish I had access to some proper metal working tools.
Bert
Yikes, all those panels with foil protection, you must really enjoy spending cash.
There's something I really like about the measured ruled lines. It would be fun to etch/machine measurement lines on the finished panels. Looks like it was made with human hands with tools. Nice!!!
a non believer of twisted pairs.Our diy member bokiooo7 from Serbian baby diya made some pornographic images (18+):
Passing single wires through holes in metal panels can cause problems, especially ferrous panels. Aluminium may be less of a problem.
Last edited:
Beyond the sad interpretations and then sad counsels about constructions tips that someone of Our forum members can take , who never and ever show anything, your job is amazing, witty and original. Aesthetically superior.
Last edited: