Hello,6Vac 0.5A
6Vac 0.5A
18VAC 0.2A
18VAC 0.2A
Thanks for these informations, but as showed in post #676, TX has only 0,15A for 18VAC ?
Furthermore , DC voltages will be in an other chassis ( i will not use rectifiers on the main board) , so it's the reason of my question.
Br
Jacky
Hi Quanghao, I have sent you a pm regarding the option of the the fully assembled version for $150.
9VAC not good !
A resistor before the diodes . But ok 🙂 I will use 2 transformers.
A resistor before the diodes . But ok 🙂 I will use 2 transformers.
The current rating looks a little low too. I had a couple 6.3V, 2A trannies around, so I just used them and they appear to work fine.
In different posts, I have seen different transformer requirements, so it is a little confusing.
Randy
Yes I am aware off the 0,6 A is to low so I will use the one I have for the I/V and the one from the group buy for the rest. 🙂
But a resistor before diode functions very well.
But a resistor before diode functions very well.
If you still need to order it
2 x 15-0-15 Vac/>200mA
2 x 0-6 Vac/>1.5A
According to this post I have ordered a 15V-0-15V transformer.
What's the impact of 15V-0-15V versus 18V-0-18V?
Sorry if I missed the post: But is there any word on how soon orders which include the chassis and transformers are supposed to begin shipping?
According to this post I have ordered a 15V-0-15V transformer.
What's the impact of 15V-0-15V versus 18V-0-18V?
hi!
now see me😛lease see the image
thanks
Attachments
Hi TarnishedEars
about 5 days time, I will continue to have full and shipped to you the power transformer kit +chassis
I am very sorry for the delay!
would like to thank and wish sympathetic !
Quanghao
about 5 days time, I will continue to have full and shipped to you the power transformer kit +chassis
I am very sorry for the delay!
would like to thank and wish sympathetic !
Quanghao
Yes I am aware off the 0,6 A is to low so I will use the one I have for the I/V and the one from the group buy for the rest. 🙂
But a resistor before diode functions very well.
yes, 0.6A ( 0-6 V for DAC ) it is to low,
because when you run DSD, DAC need about 1A when play with uSB!
Quanghao
expectation
Hi Quanhao,
You seem to be very busy, so I'm sorry to ask you for the second time that your spreadsheet needs to be updated.
I sent my address to you, first time by e-mail and second time by posting in this thread, and I'm still marked in yellow background in your list.
I'm in France so I suppose shipping fees will be the same as Domi78's : 170$/123$. I'm ready to pay remaining amount but I need confirmation about shipping fees and if you got my postal address.
Kind regards.
raoul
Hi Quanhao,
You seem to be very busy, so I'm sorry to ask you for the second time that your spreadsheet needs to be updated.
I sent my address to you, first time by e-mail and second time by posting in this thread, and I'm still marked in yellow background in your list.
I'm in France so I suppose shipping fees will be the same as Domi78's : 170$/123$. I'm ready to pay remaining amount but I need confirmation about shipping fees and if you got my postal address.
Kind regards.
raoul
Hi TarnishedEars
about 5 days time, I will continue to have full and shipped to you the power transformer kit +chassis
I am very sorry for the delay!
would like to thank and wish sympathetic !
Quanghao
Hi TarnishedEars
about 5 days time, I will continue to have full and shipped to you the power transformer kit +chassis
I am very sorry for the delay!
would like to thank and wish sympathetic !
Quanghao
That's not a problem. I understand your production difficulties, as well as needing to take care of your new baby. Fortunately mine have been out of diapers for nearly 10 years now, but I remember what it was like.
Thanks for all of your hard work!
That's not a problem. I understand your production difficulties, as well as needing to take care of your new baby. Fortunately mine have been out of diapers for nearly 10 years now, but I remember what it was like.
Thanks for all of your hard work!
ok, thanks!
Hi Quanhao,
You seem to be very busy, so I'm sorry to ask you for the second time that your spreadsheet needs to be updated.
I sent my address to you, first time by e-mail and second time by posting in this thread, and I'm still marked in yellow background in your list.
I'm in France so I suppose shipping fees will be the same as Domi78's : 170$/123$. I'm ready to pay remaining amount but I need confirmation about shipping fees and if you got my postal address.
Kind regards.
raoul
I"m sorry, i will update my spreadsheet.
Tks!
Hi Quanghao,
I will not be home in the next few weeks. You can send me the parcel after july 5?
Thank you very much.
Claudio
I will not be home in the next few weeks. You can send me the parcel after july 5?
Thank you very much.
Claudio
- Status
- Not open for further replies.
- Home
- More Vendors...
- Quanghao Audio Design
- DAC-END R (ES9018) full assembled board