They are the baseline for classic designs , otala (symasym - subzero) , RCA (dx-aksa) , Linn (self - quasi).
Dr. Bora is not afraid to use more CFP inputs or other "finer touches" in his designs. The classics are good (and sound good), but can be refined with better auxiliary circuitry and better/faster parts. I notice this looking at my "bora" schema collection.
OS
@ostripper
What is going on with your WEB page...? There were a nice compilation of good schematics and other useful stuff. I can't open it any more...
What is going on with your WEB page...? There were a nice compilation of good schematics and other useful stuff. I can't open it any more...
If you want , i'll let YOU have full access. It has become quite large.
Just give me some of your newer designs.
OS
Just give me some of your newer designs.
OS
That could be arranged but condition is that they are JUST and ONLY for your eyes regardless of anything!!!
PM me , I will give you web address.
I would never copy someone's work. My "supersym" is not M. brittners "symasym" , it is more influenced by Otala , hitachi , and any other worthwhile idea I have been shown. My goals are not commercial.
OS
I would never copy someone's work. My "supersym" is not M. brittners "symasym" , it is more influenced by Otala , hitachi , and any other worthwhile idea I have been shown. My goals are not commercial.
OS
dear dr bora
greetings i want to make omni dc protector can it be used
ith a hexfet amplifier av 400 anthony holton design mainly interested in less than
2 ohm protection will it work for this amplifier
thanking you
andrew lebon
greetings i want to make omni dc protector can it be used
ith a hexfet amplifier av 400 anthony holton design mainly interested in less than
2 ohm protection will it work for this amplifier
thanking you
andrew lebon
Of course it can... with ANY modern amplifier with split supply and complementary output stage. Some components values might need tweaking in any particular case because they depend of used PSU voltages and output power.
OMNI protector is undeservedly rarely mentioned in threads dealing with that type of circuits. It is a very good and universal solution. You can find it in this thread (several consecutive posts!!!):
http://www.diyaudio.com/forums/soli...egrated-247-output-devices-28.html#post649777
OMNI protector is undeservedly rarely mentioned in threads dealing with that type of circuits. It is a very good and universal solution. You can find it in this thread (several consecutive posts!!!):
http://www.diyaudio.com/forums/soli...egrated-247-output-devices-28.html#post649777
TDA7294
HI All,
I have seen this diagram at Dr Bora's webiste for active speakers. Is there anyone who has its PCB and layout files?
Regards !!
HI All,
I have seen this diagram at Dr Bora's webiste for active speakers. Is there anyone who has its PCB and layout files?
Regards !!
Is that question for me Dadi55?
--------------------------------------
@Wasim
Check your mail for PCB files!
hi All,
anyone can tell me what type of PS should I use with these TDA amp? I was thinking of making SMPS for it is there anyone has SMPS design and PCB layot files? Please share
Regards
anyone can tell me what type of PS should I use with these TDA amp? I was thinking of making SMPS for it is there anyone has SMPS design and PCB layot files? Please share
Regards
New boards for Sigma amplifier. Waiting for parts to arrive and to start composing the amplifier. Power supply will be + /-48V DC.
Uploaded with ImageShack.us
An externally hosted image should be here but it was not working when we last tested it.
Uploaded with ImageShack.us
Hi viktor this is a nice board. Do you have any regulated power supply PCB and diagram? I need it for TDA 7294 amplifier.
I have not made regulated power supplies, all of them were classic. Here's two solutions for you
http://bas.elitesecurity.org/splitdar.gif
http://bas.elitesecurity.org/splitstab.gif
http://bas.elitesecurity.org/splitdar.gif
http://bas.elitesecurity.org/splitstab.gif
Viktore,
In the original Sigma schema the power supply is set to dual 68V and the output is 130W RMS / 8 ohms. With a power of 48V what would be the output?
I want to start with some of Dr. Borivoje amplifiers, some with high quality and no more than 80W / 8 ohms. Having said in mind, is Sigma good candidate (I know that Dr. Bora have some non public better amplifiers hidden B-)) or would you suggest something else?
Also, if in your opinion Sigma is good, can I have a PCB and layout as well?
Hvala, Marin
In the original Sigma schema the power supply is set to dual 68V and the output is 130W RMS / 8 ohms. With a power of 48V what would be the output?
I want to start with some of Dr. Borivoje amplifiers, some with high quality and no more than 80W / 8 ohms. Having said in mind, is Sigma good candidate (I know that Dr. Bora have some non public better amplifiers hidden B-)) or would you suggest something else?
Also, if in your opinion Sigma is good, can I have a PCB and layout as well?
Hvala, Marin
Last edited: