> CCCCC-R-CCCCC-R-CCCCC-R-CCCCCCCCCC
That's not enough C's for me !!
Patrick
PS
What you see is only 1/3 of the caps for one of my AXJ monoblocks.
Another 1/3 is hidden below, and yet another 1/3 is mounted close to the power modules.
All hand matched to 1% of course. We bought 1000 in total (220uF 50V Panasonic FC).
PCBs are double sided 205um thick (normal PCBs are 35um).
And this was 2004.
.
That's not enough C's for me !!
Patrick
PS
What you see is only 1/3 of the caps for one of my AXJ monoblocks.
Another 1/3 is hidden below, and yet another 1/3 is mounted close to the power modules.
All hand matched to 1% of course. We bought 1000 in total (220uF 50V Panasonic FC).
PCBs are double sided 205um thick (normal PCBs are 35um).
And this was 2004.
.
Attachments
Last edited:
> It's a fairly even race so far. I bet Patrick is pulling his hair out.
I already have solutions for both.
Probably easier life for CRC as Reg means extra heat sink.
But there is a solution that is good enough for me.
We now even have a design equally good looking for MF35-100, for the single ended F5 guys.
Patrick
I already have solutions for both.
Probably easier life for CRC as Reg means extra heat sink.
But there is a solution that is good enough for me.
We now even have a design equally good looking for MF35-100, for the single ended F5 guys.
Patrick
SorrY for mine I have
Apem 16 mm stainles stell security vandall proof like RS components 278 1149.
This will either be taken as a Joke or put the delay the design 1 or 2 weeks.
Speaker protection sound good just think at what she will say if you blow your speakers.
I am working on it but ...
DC Detection is a low filter say 2Hz or around there, and the rest is litle 8legged critters so any pointers to other alternatives are most welcome.
Al
Apem 16 mm stainles stell security vandall proof like RS components 278 1149.
This will either be taken as a Joke or put the delay the design 1 or 2 weeks.
Speaker protection sound good just think at what she will say if you blow your speakers.
I am working on it but ...
DC Detection is a low filter say 2Hz or around there, and the rest is litle 8legged critters so any pointers to other alternatives are most welcome.
Al
Parallel survey :
Yes or no Stainless Steel Push Button (1x 10mm, not toggle switch) on the front panel :
Yes Push button
ashaw
TheShaman
Horio
qusp
No Push button
xxx
xxx
xxx
wow thats a nice statement and I look forward to the pics, because the APEM push buttons are the sexiest i've seen! I have them on both my current builds. I got this really sweet one that is just a flat brushed alloy disc and it doesnt push, instead uses piezo-electric energy from the finger, stays still no mechanism.
Yes or no Stainless Steel Push Button (1x 10mm, not toggle switch) on the front panel :
Yes Push button
ashaw
TheShaman
Horio
qusp
No Push button
xxx
xxx
xxx
wow thats a nice statement and I look forward to the pics, because the APEM push buttons are the sexiest i've seen! I have them on both my current builds. I got this really sweet one that is just a flat brushed alloy disc and it doesnt push, instead uses piezo-electric energy from the finger, stays still no mechanism.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.