@workhorse
can i have some links to the "Lab" =) really like those amp that utilizes good old silicon steel for bass duty. I have audition some switching amp for bass duty but there something is lacking in it, I believe it's the " heaviness on the bass notes" it more like hammering a wall using a sledge hammer and using a wrecking ball. Well just my two cents guys.
can i have some links to the "Lab" =) really like those amp that utilizes good old silicon steel for bass duty. I have audition some switching amp for bass duty but there something is lacking in it, I believe it's the " heaviness on the bass notes" it more like hammering a wall using a sledge hammer and using a wrecking ball. Well just my two cents guys.
what "LAB" you mean audiomachine? 😱
Some more test results posted here...
8KW, Heavyweight Power Amplifier - Speakerplans.com Forums - Page 17
@xmax extreme,
I was directing the question to Mr. Workhorse, Googling doesn't bring up Zypher Labs on my browser that is why I am asking him for the links to the "Lab", sorry for the confusion there mate. Mr. Andrewlebon say's that it looks like your 8KW amp is designed by one of our diyaudio member, Mr. Workhorse of Zypher Labs.
By the way mate I didn't see signs of mica insulator, is it a grounded collector topology ?
Regards
I was directing the question to Mr. Workhorse, Googling doesn't bring up Zypher Labs on my browser that is why I am asking him for the links to the "Lab", sorry for the confusion there mate. Mr. Andrewlebon say's that it looks like your 8KW amp is designed by one of our diyaudio member, Mr. Workhorse of Zypher Labs.
By the way mate I didn't see signs of mica insulator, is it a grounded collector topology ?
Regards
The insulator is there but not mica, the amplifier uses Grounded Emitter Topology [Better damping and better Low end response while keeping the circuitry confined to triple EF]with 3-Step Class-H.
sir JOJO do you have a copy and size in inches of dual electrotech.?please give me a copy and plan for this project..tnx in advace and more power..
@malufhet2000
here is the original JBL Electrotec LabQ MidHi...
Buy & Sell: SoundBroker.com - No Query Specified
have a nice day,
jojo
here is the original JBL Electrotec LabQ MidHi...
Buy & Sell: SoundBroker.com - No Query Specified
have a nice day,
jojo
@rhodrich
From the origin of the Mt122...its p-audio and bms was used.
we install jh126 and TDU500
have a nice day
jojo
From the origin of the Mt122...its p-audio and bms was used.
we install jh126 and TDU500
have a nice day
jojo
@rhodrich
my client bought a 1.5" Hi driver with a 750hz horn...we cross it at 900hz.
It's better if you use a delay(DR) to correct time issue between CD and 12"s.
have a nice day
jojo
my client bought a 1.5" Hi driver with a 750hz horn...we cross it at 900hz.
It's better if you use a delay(DR) to correct time issue between CD and 12"s.
have a nice day
jojo
@jojo
sir this design is for 12"? right. on the chamber i seald do i need to put dampener material?
@rhodrich
This one is for 15"...there is a box MT122 designed for 12" if you need it i will post it...yes, you need to put some damping material to absorb standing waves from parallel walls.
have a nice day,
jojo
This one is for 15"...there is a box MT122 designed for 12" if you need it i will post it...yes, you need to put some damping material to absorb standing waves from parallel walls.
have a nice day,
jojo
- Status
- Not open for further replies.