Konzert Amp & Speakers Website

[eeraudio]

sir jo anong mas maganda WSX or TH118? thnx

 

[paqs2000]

Hi DIY'ers

I am planning to setup a PA Sounds system for starter what is the basic needs/requirements?

For example SUBS?
Power Amp
Mids?

Do I need also a crossover?

Please help as this is my business when going back home for good.

Thanks in advance and more power.

 

[paqs2000]

Sir Jojo Matunog po name mo baka naman puede pong pa advice salamat po ng marami.

Kung may Sub mid at hihg need po ba na 3 amps din?

 

[Mooly]

Sir Jojo Matunog po name mo baka naman puede pong pa advice salamat po ng marami.

Kung may Sub mid at hihg need po ba na 3 amps din?

English only please 🙂 This was the best I could do,

Renowned Sir Jojo you might also please name Please refrain pong more advice thanks much.

If there Sub mid and hihg Do you need 3 amps also?

 

[boynegro24]

Hello! First of all, I am not sure if I am posting this to correct forum.
Can someone please help me on how to make or send a wiring diagram for below drivers?
Konzert KW-880M
8" Professional HiFI Subwoofer
250 watts peak
25oz magner
Dual Impedance 8 ohms / 8 ohms
Konzert KM-1000M
4" Professional HiFI Midrange
100 Watts Peak
4 oz Magnet
Impedance 4-8 ohms
Konzert KT-760M
3" Professional HiFi Tweeter
80watts peak
3oz Magnet
Impedance 4-8ohms

I am using AV302 Konzert amplifier

 

[Mooly]

I have deleted all your other posts and threads. As a new signup all your posts need to be approved by a moderator before they appear... it doesn't last for to long 🙂

 

[baescdj]

AD MC5000

Mga bossing kumusta kayo happy new year may itatanong lang poh ako kung may nakatry na ba sa inyo ng AD MC5000 amplifier 1300w sa 8 ohms at 2000w naman xa sa 4 ohms...kung may naka try na kumusta po ang performance plano ko kasi bumili.thank you

 

[Mooly]

Mga bossing kumusta kayo happy new year may itatanong lang poh ako kung may nakatry na ba sa inyo ng AD MC5000 amplifier 1300w sa 8 ohms at 2000w naman xa sa 4 ohms...kung may naka try na kumusta po ang performance plano ko kasi bumili.thank you

English only please 🙂

I'm struggling to translate this one,

Sir how are you happy with lang I ask if you ever iinumin AD MC5000 amplifier 1300W 2000w 8 ohms and 4 ohms xa turn ... if you already try to plan how much the performance because I buy thank you.

 

[baescdj]

sorry for that i just want to know if anybody here got experience by using Ad MC5000 amplifier and what is the feedback 1300watts at 8 ohms and 2000watts at 4 ohms

 

[suryadi5417]

Does anybody have schematic of Tasso i4,? it i from china too..

 

[kintanha]

Here's my DIy 3-way active X-over fitted in Aluminum chassis, from Silicon chip.
Silicon Chip Online - Active 3-Way Crossover for Loud Speaker Systems
i'm just adding frequency adjust controls

An externally hosted image should be here but it was not working when we last tested it.

hello,
Can you help me where in the circuit of this 3 ways crossover should I add the frequency adjust controls same picture
Sorry for my English
Thanks
Kintanha

 

[turk 182]

Kintanha
that crossover is fixed frequency you can't just add potentiometers to get variable frequency control!

 

[kintanha]

Turk
Thank you for your reply
Kintanha

 

[rcabang]

Hello sir. Audio machine how many ohms the variable resistor 2? In konzert k10 circuit?

 

[theb0b]

Anyone know where to buy Crown PRO-HT-199 Horn Tweeter in Cebu?

 

[tunying22]

i have the diagram of 150W AMP by edmund wong but i dont know how to send it

 

[Benmuthlaq]

Hi.. to all.. can anyone help me im planning to buy a sound system for my home set up in door and out door for about 500-600 watts. Its for sound trip and karaoke purpose only not too loud but not too low. So, which of the ff: are the best quality sound soft bass not too hard. For a tight budget guys.

1. SAKURA
2. KEVLER
3. KONZERT

Also the speaker should be the same brand or it can be pair with different brand of amplifier?

Thankz... more watt power to everyone. .

 

[brian012787]

k10 problem

hi sirs

i have a konzert k10 but it was having a problem. When i turn on the power button the indicator of power and protect is ON after a seconds it's going to normal indication which is the power indicator is only lights ON.
BUT! after 10 seconds the protect indicator is going to ON, so now i had 2 ON indicators again which is POWER and PROTECT but after 3 seconds the 2 indicators as i mention suddenly OFF! In 1 click the limit indicator is going to ON and it will remain on as in stanby!

If you ask i have a load. (i have no load)

please help me.

 

[cesdat]

to sir audiomachine, do you have a shop where I can bring our K10 unit? It has no output signal on both channels but the unit did not overheated nor used over limit since it is only used in a church every Sunday. Once you turn it ON you can still hear that the relay on both channels are clicking and the PROTECT LED is not lighted. The 2 fans are still working well but no output signal can be heard nor can be seen on its SIGNAL LED. Pls help..thanks