After a long weekend , i have finished the external PSU!









Here are some internal view pictures.

On the upper side the two +/- Power Supply Modules,
in the lower left corner the 10H choke on amorphous cores from AE-Europe,
in the middle the 1st cap (3,9µF Mundorf supreme silver in oil) of the HV-PSU line,
in the lower right corner the Power Switch Module with onboard solid state relays.



And some close-up pictures

Finally the engraved top-, front- & backplate arrived.



Surely you are asking yourself, why i made a 1mm deep square around the place for the transformer...

...now here is the answer



I´ve got a perfect aluminum transformer housing and now it sits perfect without an air gap.


Now it´s time to assemble the parts.