External PSU finished
Posted 2nd May 2011 at 07:02 PM by dvb projekt
Updated 30th November 2016 at 09:46 AM by dvb projekt
Updated 30th November 2016 at 09:46 AM by dvb projekt
After a long weekend
, i have finished the external PSU!




Here are some internal view pictures.
On the upper side the two +/- Power Supply Modules,
in the lower left corner the 10H choke on amorphous cores from AE-Europe,
in the middle the 1st cap (3,9ĩF Mundorf supreme silver in oil) of the HV-PSU line,
in the lower right corner the Power Switch Module with onboard solid state relays.

And some close-up pictures


Now itīs time to give the HV-PSU and the 2nd SSHV-Shunt module some time to burn in.







Here are some internal view pictures.
On the upper side the two +/- Power Supply Modules,
in the lower left corner the 10H choke on amorphous cores from AE-Europe,
in the middle the 1st cap (3,9ĩF Mundorf supreme silver in oil) of the HV-PSU line,
in the lower right corner the Power Switch Module with onboard solid state relays.

And some close-up pictures


Now itīs time to give the HV-PSU and the 2nd SSHV-Shunt module some time to burn in.


Total Comments 4
Comments
-
Posted 6th May 2011 at 12:51 PM by wintermute -
Quote:
Thatīs why i love a tube rectified HV-PSU with Mundorfīs TubeCapīs.
The sound is so real...no way back to the SS rectifier and the electrolytic PSU caps!
Posted 6th May 2011 at 05:30 PM by dvb projekt -
Posted 12th June 2013 at 02:30 PM by merlin2069er -
Posted 12th June 2013 at 03:50 PM by dvb projekt