Go Back   Home > Forums > Blogs > dvb projekt

Rate this Entry

Digital Input Modules Power & Signal Schematic

Posted 8th May 2011 at 04:48 PM by dvb projekt
Updated 30th November 2016 at 09:28 AM by dvb projekt

On request the section of my digital input modules


Click the image to open in full size.
Total Comments 3

Comments

  1. Old Comment
    With the sperate +5vdc shunt reg pcb ...can it be altered to give an output between +10 and +15 vdc?. The input is 22vdc.
    Would it require just a change of pot from 200 to 5k ohms?
    Thanks
    Paul
    permalink
    Posted 21st July 2011 at 03:55 AM by Chilli6565 Chilli6565 is offline
  2. Old Comment
    dvb projekt's Avatar
    Quote:
    Originally Posted by Chilli6565 View Comment
    With the sperate +5vdc shunt reg pcb ...can it be altered to give an output between +10 and +15 vdc?. The input is 22vdc.
    Would it require just a change of pot from 200 to 5k ohms?
    Thanks
    Paul
    Hi Paul,

    you could do that with a 5K pot, yes.
    Only keep in mind Salas recommendation of 10V in/out difference.

    permalink
    Posted 21st July 2011 at 05:06 AM by dvb projekt dvb projekt is offline
  3. Old Comment
    sweet.....thanks Oliver...u da man !
    permalink
    Posted 21st July 2011 at 07:30 AM by Chilli6565 Chilli6565 is offline
 

New To Site? Need Help?
Copyright ©1999-2017 diyAudio