Free pcb's from me
Posted 10th February 2010 at 08:34 PM by peranders
Updated 22nd October 2011 at 12:36 PM by peranders
Updated 22nd October 2011 at 12:36 PM by peranders
diyaudio.com is a good place and this is my effort to raise money for the service.
I'm offering 4 pcs. of totally free pcb's of my diamond buffer SSB01 to all donating diyaudio members will get this without any charge.
Contact me via email from diyaudio (this is important) since then I can easily see that your are a member and I can also check if you have donated. Don't forget to write down your address also. Please write it so I can cut it out and put on the envelope.
Please notice that the pcb's requires two small patches (wires) and the version of the pcb is revision 0, red pcb's.
Schematics, pcb layout
BOM
The 25 first gets 4 pcs. of my SSB01 for free, even the shipping
1 Luke, shipped 2010-02-12
2 Boilermakerfan, shipped 2010-02-12
3 tcpoint, shipped 2010-02-12
4 khaho, shipped 2010-02-12
5 HiljaisuudenMeri, shipped 2010-02-12
6 Ed LaFontaine, shipped 2010-02-15
7 nelsonvandal, shipped 2010-02-18
8 nikongod, shipped 2010-02-18
9 vixr, shipped 2010-02-19
10 TheSeekerr, shipped 2010-02-19
11 qusp, shipped 2010-03-24
12 mhamel, shipped 2010-02-22
13 sandbasser, shipped 2010-02-22
14 supertrioe, shipped 2010-03-04
15 aleka, shipped 2010-03-18
16 pidesd, shipped 2010-03-18
17 thanh1973, shipped 2010-03-24
18 panson_hk, shipped 2010-03-25
19 hemling, shipped 2010-03-25
20 alopa, shipped 2010-04-06
21 Audiofanatic, shipped 2010-04-07
22 grenert, shipped 2010-04-09
23 akira, shipped 2010-04-19
24 satoru, shipped 2010-04-24
25 steven2992, shipped 2010-05-07
I'm offering 4 pcs. of totally free pcb's of my diamond buffer SSB01 to all donating diyaudio members will get this without any charge.
Contact me via email from diyaudio (this is important) since then I can easily see that your are a member and I can also check if you have donated. Don't forget to write down your address also. Please write it so I can cut it out and put on the envelope.
Please notice that the pcb's requires two small patches (wires) and the version of the pcb is revision 0, red pcb's.
Schematics, pcb layout
BOM
The 25 first gets 4 pcs. of my SSB01 for free, even the shipping
1 Luke, shipped 2010-02-12
2 Boilermakerfan, shipped 2010-02-12
3 tcpoint, shipped 2010-02-12
4 khaho, shipped 2010-02-12
5 HiljaisuudenMeri, shipped 2010-02-12
6 Ed LaFontaine, shipped 2010-02-15
7 nelsonvandal, shipped 2010-02-18
8 nikongod, shipped 2010-02-18
9 vixr, shipped 2010-02-19
10 TheSeekerr, shipped 2010-02-19
11 qusp, shipped 2010-03-24
12 mhamel, shipped 2010-02-22
13 sandbasser, shipped 2010-02-22
14 supertrioe, shipped 2010-03-04
15 aleka, shipped 2010-03-18
16 pidesd, shipped 2010-03-18
17 thanh1973, shipped 2010-03-24
18 panson_hk, shipped 2010-03-25
19 hemling, shipped 2010-03-25
20 alopa, shipped 2010-04-06
21 Audiofanatic, shipped 2010-04-07
22 grenert, shipped 2010-04-09
23 akira, shipped 2010-04-19
24 satoru, shipped 2010-04-24
25 steven2992, shipped 2010-05-07
Total Comments 15
Comments
-
This looked perfect to try in my gyrator-based tube crossover until I saw that it was SMD. After struggling with a very simple SMD build, I realized that part of my fascination with tubes probably comes from being actually able to see and manipulate the parts using my 55 year old eyes and hands. If only I had a compliant teenage child who would assemble this stuff for me... ;-)
Posted 11th February 2010 at 10:28 AM by SY -
Posted 12th February 2010 at 05:55 AM by peranders -
Posted 13th February 2010 at 03:24 AM by BoilermakerFan -
Posted 20th February 2010 at 12:39 AM by vixr -
Posted 20th February 2010 at 12:30 PM by sandbasser -
Posted 21st February 2010 at 06:32 PM by peranders -
Posted 21st February 2010 at 09:12 PM by sandbasser -
Posted 26th February 2010 at 09:07 PM by BoilermakerFan -
Posted 27th February 2010 at 10:57 PM by vixr
Updated 1st March 2010 at 01:02 AM by vixr -
Posted 5th March 2010 at 12:31 PM by wintermute -
Arrived today.
They are made with excellence.
Thanks again.Posted 11th March 2010 at 11:06 PM by supertrioe -
I would like to be added to the lucky list.
Thanks
PerandersPosted 24th March 2010 at 01:58 AM by Melon Head -
Posted 30th March 2010 at 02:10 PM by panson_hk -
The boards arrived. Thank you so much!!
Posted 29th April 2010 at 11:41 PM by satoru -
Posted 29th December 2010 at 09:54 AM by peranders