Aengus said:*We need a shorter name, I'm tired of typing the whole thing. How about VIdiyAF?
VI diyFEST or VI diy
dave
spind said:Q-Components in Waterloo lists this driver at $94 CDN each, plus shipping. If you are in Ontario you would have cheaper shipping charges from Waterloo, but you'd have to pay PST. Sounds like the group buy would save a few $$$$.
Actually, the provincial tax organization encourages folks in BC to buy from ON, and vice-versa. CanadaPost must love it.
The$10 differential in this case still makes the GB here more attractive for us all, though.
John
CSS/XBL said:Hi,
Isn't Ontario going HST?
Yeah, but we can expect a bribe to soften the blow.
Another way to suck more tax outta us...
So, to summarize current statements of interest (question mark by name means uncertain about whether interested; by quantity means uncertain about - duh - quantity):
Person -- Qty.
Aengus -- 2
Doorman -- 2(?)
Leadbelly -- 2-3
VictoriaGuy(?) -- 2(?)
for a total of 8-9.
Looks promising...
Person -- Qty.
Aengus -- 2
Doorman -- 2(?)
Leadbelly -- 2-3
VictoriaGuy(?) -- 2(?)
for a total of 8-9.
Looks promising...
I'm with you on this statement, I can't really afford them but if they are cheap enough I can't turn it down... A pair for me may also be in the future, Peace.
planet10 said:We can't not get 2, just a question of when it can be afforded.
dave
Person -- Qty.
Aengus -- 2
Doorman -- 2
Leadbelly -- 2 or 3
Planet10(?) -- 2
Russell Dawkins -- 4
speakrsrfun -- 2(?)
VictoriaGuy(?) -- 2(?)
Total: 12 / 17(?)
Looks like there is definitely enough interest. If I said we'll close it end of day May 17th, would that be enough time for everyone to raise funds - or should I allow a bit longer? The other way of phrasing that is, is there anyone on the list who wants theirs urgently, or is everone OK with waiting until (say) June?
Please give me feedback - I'll look for a consensus.
Regards.
Aengus
Aengus -- 2
Doorman -- 2
Leadbelly -- 2 or 3
Planet10(?) -- 2
Russell Dawkins -- 4
speakrsrfun -- 2(?)
VictoriaGuy(?) -- 2(?)
Total: 12 / 17(?)
Looks like there is definitely enough interest. If I said we'll close it end of day May 17th, would that be enough time for everyone to raise funds - or should I allow a bit longer? The other way of phrasing that is, is there anyone on the list who wants theirs urgently, or is everone OK with waiting until (say) June?
Please give me feedback - I'll look for a consensus.
Regards.
Aengus
Originally posted by doorman
I too have a pair of 108ez's doing nothing--anybody tried this combination?
Don, how are you at crossover design? That's the part that will be, um, interesting for me - but I expect help might be found through the forum as well. If worst comes to worst, I suppose one could start with Martin's FE103/15" Alpha xover and tune from there?
Regards.
Aengus
speakrsrfun said:due to an unexpected power surge I have to repurchase another DCX2496
Sorry to hear about the death. What are you doing with the dead? It would be interesting to have Daniel poke around in the innards and do an autopsy
dave
Sorry the fried unit is already spoken for, but for the same reason Daniel would have looked at it. I have a friend who's son is a cicuit designer and asked if he could take a look, I agree'd but asked that it be left as is unless he decided he could fix it. The cost of repair on this unit was $290+taxes and about $250 of that was for labour I'm sure, so you can see why I was hesitant to fix and just pay for a new one, cheaper anyway....
It's a good thing they weigh nothing because shipping is swallowable from the States, anywhere else gets pricey.
Anyway I'll keep you informed and tell you what he finds, Peace.
Speaks
It's a good thing they weigh nothing because shipping is swallowable from the States, anywhere else gets pricey.
Anyway I'll keep you informed and tell you what he finds, Peace.
Speaks
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- Canadian GB for Goldwood GW-1858?