Hi Marc,
board received two days ago in excellent condition.
Thank you for careful packing!
Boards looking so inspirational
Good work Marc, Respect!
Now... a lot of question in my head, but first I must figure
what exactly want from this design Speaking about OPT...
Using my old James 50W OPT 5k, and KT88's may be is overkill.
So looking for some good Lundahl and other power tubes...
As usual, bugs in our heads
Best Regards,
Kiril
board received two days ago in excellent condition.
Thank you for careful packing!
Boards looking so inspirational
Good work Marc, Respect!
Now... a lot of question in my head, but first I must figure
what exactly want from this design Speaking about OPT...
Using my old James 50W OPT 5k, and KT88's may be is overkill.
So looking for some good Lundahl and other power tubes...
As usual, bugs in our heads
Best Regards,
Kiril
Last edited:
Hello Everybody,
I am pleased to see that most of you received the boards and liked them
I could not came back earlier because I had to make medical analysis in an hospital during the last 4 days for my back problem. Finally I have a cruralgie (I don't know the name in English, it is when you have a nerve blocked in the spine...) and also an hernia, I need to do some surgery soon
Anyway, I will try to answer your questions when I can... Here is the status of received boards :
silvercosworth 6 shipped received
rongon 2 shipped received
scd 2 shipped
leejh 6 shipped received
manniraj 2 shipped received
carrier bag man 2 shipped received
matejsirk 6 shipped received
rene 6 shipped received
sigfire 2 shipped received
fabian85 2 shipped
rpeter 2 shipped received
sylvain 2 shipped received
acccruz 2 shipped received
big cheese 2 shipped received
potepuh 2 shipped received
lucylu 2 shipped received
zman01 2 shipped received
cambe 2 shipped received
tomlang 2 shipped received
dieterk 2 shipped
overtheairbroadcast 2 shipped
faa 4 shipped
abszero 4 shipped received
lordoff 2 shipped received
mituisho 2 shipped
Lutto 2 shipped received
Kroma 2 shipped received
samsie 2 shipped
pcan 2 shipped received
collux 2 shipped
Cheers,
Marc
I am pleased to see that most of you received the boards and liked them
I could not came back earlier because I had to make medical analysis in an hospital during the last 4 days for my back problem. Finally I have a cruralgie (I don't know the name in English, it is when you have a nerve blocked in the spine...) and also an hernia, I need to do some surgery soon
Anyway, I will try to answer your questions when I can... Here is the status of received boards :
silvercosworth 6 shipped received
rongon 2 shipped received
scd 2 shipped
leejh 6 shipped received
manniraj 2 shipped received
carrier bag man 2 shipped received
matejsirk 6 shipped received
rene 6 shipped received
sigfire 2 shipped received
fabian85 2 shipped
rpeter 2 shipped received
sylvain 2 shipped received
acccruz 2 shipped received
big cheese 2 shipped received
potepuh 2 shipped received
lucylu 2 shipped received
zman01 2 shipped received
cambe 2 shipped received
tomlang 2 shipped received
dieterk 2 shipped
overtheairbroadcast 2 shipped
faa 4 shipped
abszero 4 shipped received
lordoff 2 shipped received
mituisho 2 shipped
Lutto 2 shipped received
Kroma 2 shipped received
samsie 2 shipped
pcan 2 shipped received
collux 2 shipped
Cheers,
Marc
Hello,
Only 5 persons didn't received the PCB yet, please confirm that you have received them when they arrive...
silvercosworth 6 shipped received
rongon 2 shipped received
scd 2 shipped
leejh 6 shipped received
manniraj 2 shipped received
carrier bag man 2 shipped received
matejsirk 6 shipped received
rene 6 shipped received
sigfire 2 shipped received
fabian85 2 shipped received
rpeter 2 shipped received
sylvain 2 shipped received
acccruz 2 shipped received
big cheese 2 shipped received
potepuh 2 shipped received
lucylu 2 shipped received
zman01 2 shipped received
cambe 2 shipped received
tomlang 2 shipped received
dieterk 2 shipped
overtheairbroadcast 2 shipped
faa 4 shipped
abszero 4 shipped received
lordoff 2 shipped received
mituisho 2 shipped received
Lutto 2 shipped received
Kroma 2 shipped received
samsie 2 shipped
pcan 2 shipped received
collux 2 shipped received
Cheers,
Marc
Only 5 persons didn't received the PCB yet, please confirm that you have received them when they arrive...
silvercosworth 6 shipped received
rongon 2 shipped received
scd 2 shipped
leejh 6 shipped received
manniraj 2 shipped received
carrier bag man 2 shipped received
matejsirk 6 shipped received
rene 6 shipped received
sigfire 2 shipped received
fabian85 2 shipped received
rpeter 2 shipped received
sylvain 2 shipped received
acccruz 2 shipped received
big cheese 2 shipped received
potepuh 2 shipped received
lucylu 2 shipped received
zman01 2 shipped received
cambe 2 shipped received
tomlang 2 shipped received
dieterk 2 shipped
overtheairbroadcast 2 shipped
faa 4 shipped
abszero 4 shipped received
lordoff 2 shipped received
mituisho 2 shipped received
Lutto 2 shipped received
Kroma 2 shipped received
samsie 2 shipped
pcan 2 shipped received
collux 2 shipped received
Cheers,
Marc
Hi,
I have seen all the inquiries for more PCB for the Baby Huey, at least 10 in the last few days, however all 80 manufactured PCB have been sold and shipped
I may make an other GB in the future if there is interest, but I would like to wait for the feedback of the 30 persons who have bought the 80 PCB. I would like to know if they like the sound of their amplifier and may be get some suggestion for change or improvment.
Beside that it was quite a lot of work and I would not do that every month However I appreciate the positive feedback of the purchasers and I will probably do an other GB later, but I need some time, therefor stay tuned...
For those who get the boards, I have added a mechanical drawing for the top plate of the amplifier, I am also looking for a panel description compatible with Front Panel Express but again I am more comfortable with PCB CAD than mechanical one !
Best regards,
Marc
I have seen all the inquiries for more PCB for the Baby Huey, at least 10 in the last few days, however all 80 manufactured PCB have been sold and shipped
I may make an other GB in the future if there is interest, but I would like to wait for the feedback of the 30 persons who have bought the 80 PCB. I would like to know if they like the sound of their amplifier and may be get some suggestion for change or improvment.
Beside that it was quite a lot of work and I would not do that every month However I appreciate the positive feedback of the purchasers and I will probably do an other GB later, but I need some time, therefor stay tuned...
For those who get the boards, I have added a mechanical drawing for the top plate of the amplifier, I am also looking for a panel description compatible with Front Panel Express but again I am more comfortable with PCB CAD than mechanical one !
Best regards,
Marc
Attachments
Marc,
thank you for CAD drawing. This will help definitely builders.
Possible enclosures: a lot of choices.
For example, I'm thinking to use some of Takashi Enclousers, SRDSL special series for tube amp.
Years ago, impossible to find here in Europe, but things changes fortunately
http://www.takachi-enclosure.com/data/c16-17/SRDSL.pdf
thank you for CAD drawing. This will help definitely builders.
Possible enclosures: a lot of choices.
For example, I'm thinking to use some of Takashi Enclousers, SRDSL special series for tube amp.
Years ago, impossible to find here in Europe, but things changes fortunately
http://www.takachi-enclosure.com/data/c16-17/SRDSL.pdf
Last edited:
- Home
- Group Buys
- GB for Baby Huey PCB