FS: Zilchlab Econowave Crossover PCBs
Before Zilch passed away he asked me to keep these crossover boards available and in consistent production for speaker builders everywhere. Pairs are available direct from me for $32 shipped CONUS w/instructions. Send me a PM if you'd like to build a pair of Zilch's Econowave speakers.
For more specific build information check out the massive original thread here on Audiokarma: Zilch's AK Design Collaborative - Econowave Speaker | Audiokarma Home Audio Stereo Discussion Forums
Not to mention Flex Your PCD Mettle on the Parts Express site where he really picked up steam: Flex Your PCD Mettle: - Techtalk Speaker Building, Audio, Video Discussion Forum
Before Zilch passed away he asked me to keep these crossover boards available and in consistent production for speaker builders everywhere. Pairs are available direct from me for $32 shipped CONUS w/instructions. Send me a PM if you'd like to build a pair of Zilch's Econowave speakers.
For more specific build information check out the massive original thread here on Audiokarma: Zilch's AK Design Collaborative - Econowave Speaker | Audiokarma Home Audio Stereo Discussion Forums
Not to mention Flex Your PCD Mettle on the Parts Express site where he really picked up steam: Flex Your PCD Mettle: - Techtalk Speaker Building, Audio, Video Discussion Forum
Attachments
Hey Wired. I am just waiting for some parts to finish up my eWaves using the boards I got from you. They are very nice and makes this build much easier. Dennis.
New member and First-time poster here, a speaker mod newbie...
Wiredbecker, I've just sent you a PM -- I'm hoping to get boards (and everything else!) for converting a pair of original large Advents to whatever waveguide and driver is recommended (and affordable) -- I understand the Selenium model 220 8 ohm compression driver with a Pyle PH612 waveguide are recommended for the OLAs.
I appreciate any info. Thanks!
- Bob
Wiredbecker, I've just sent you a PM -- I'm hoping to get boards (and everything else!) for converting a pair of original large Advents to whatever waveguide and driver is recommended (and affordable) -- I understand the Selenium model 220 8 ohm compression driver with a Pyle PH612 waveguide are recommended for the OLAs.
I appreciate any info. Thanks!
- Bob
FS: Zilchlab Econowave Crossover PCBs
Before Zilch passed away he asked me to keep these crossover boards available and in consistent production for speaker builders everywhere. Pairs are available direct from me for $32 shipped CONUS w/instructions. Send me a PM if you'd like to build a pair of Zilch's Econowave speakers.
For more specific build information check out the massive original thread here on Audiokarma: Zilch's AK Design Collaborative - Econowave Speaker | Audiokarma Home Audio Stereo Discussion Forums
Not to mention Flex Your PCD Mettle on the Parts Express site where he really picked up steam: Flex Your PCD Mettle: - Techtalk Speaker Building, Audio, Video Discussion Forum
Sent you a pm
All PM's have been responded to. Thank you for your continued interested in Zilch's Econowave speakers!
Roughly a dozen pairs left! Thank you for your purchases. All PM's have been responded to and all boards have shipped.
I'm confused about how this board is set up. The Jackgiff schematic for Econowaves shows the LP2 attenuator port going to + of the HF driver, but published schematics show the Zilch LP2 going to the - terminal. This board is showing the LP2 terminal going to the + terminal like the Jackgiff schematic, not the Zilch schematic. Was the Zilch schematic incorrect or does it not matter?
Hi guys,
Is there a replacement for the qsc 152i waveguide? I wanted to build the altec 414 8b model. Looked in my stash and lo and behold a pair of 4148b.
Thanks
Is there a replacement for the qsc 152i waveguide? I wanted to build the altec 414 8b model. Looked in my stash and lo and behold a pair of 4148b.
Thanks
Parts Express part number 299-2303 appears to be a clone of the QSC waveguide. It is selling for the princely sum of $12.88. Crazy cheap...