Waveguides and horns

[doug20]

Cabinet itself is ca. $500 but shipping with DHL is ca. $750. We haven't found solution for the shipping. No one want handle shipping in US/CA and prices are dearer now - 6 months ago ca. $560 for a pellet now over $800.

and

Ok we calculated cost of Mummies enclosure and it is $670/pair.

So which one is it...$500 or $670??

 

[jzagaja]

$500 calculation is old before we started making an assembly. Official price is $670. Polamer does not respond on emails so I will call them tomorrow.

 

[dshambala]

Just as a suggestion I would check to see if the price is better arriving in New York vs Florida. I am still willing to assist in the shipping. I haven´t added my name to the official list yet and am interested in four horns.

dshambala

 

[jzagaja]

Iwata 300, 2" is ready.

 

[Frode]

Looks great!

Frode

 

[jzagaja]

Polamer office in Poland ships only via air to NYC, New Jersey and Chicago airport. Europellet with maximum height of 1,5 meters is about $1000.

 

[Milkduds]

Is there some other way to see the list for the iwata horns. IE will not open the autoech site?

Jim

 

[jzagaja]

Wikidot opens normally in IE - please check your PC. We are ready to ship Iwata-300 (Europe). For total cost with shipping please ask directly: info at autotech.pl

 

[Frode]

We are ready to ship Iwata-300 (Europe). For total cost with shipping please ask directly: info at autotech.pl

You've got mail!

Frode

 

[MikeR]

Can you post a picture of the throat area showing the mounting flange for a compression driver?

Thanks

 

[jzagaja]

All horns have MDF 25-30mm thick flange with holes for particular driver. In a short time we can change MDF to metal flange because with heavy drivers MDF can crack when you strongly hit it - joint is stronger.

 

[Frode]

For those who are interested, the Iwata 300 seems to end up at 200EUR(~280$) each.

Frode

 

[jzagaja]

Yes because we made it twice as thick and reinforced. Thin was prone to vibrations below 500Hz. Classic JMLC with full rollback damps vibrations better with standard thickness.

 

[Frode]

Any measurements of the Iwata 300?

Frode

 

[jzagaja]

I'm too busy with current projects. After 7th November.

 

[jzagaja]

Still a concept - CD-JMLC-400, "midrange horn"

 

[jzagaja]

Current collection.

 

[jzagaja]

Example 2-way arrangement with push-pull transmission line (for Audioshow 2010 in Warsaw).

 

[Frode]

Still a concept - CD-JMLC-400, "midrange horn"

How much does it cost?

Frode

 

[jzagaja]

At present state profile has some concavity we need to fine tune. I expect price similar to Iwata-300.