Having the smaller speaker run full range in parallel with the woofer (no capacitor) will reduce the impedance seen by the amplifier to around 2 ohm which will damage the 50Wx2 amplifier whose minimum impedance requirement is 4 ohm. Also, the small speaker will struggle to keep up with the woofer in the bass.
I have given you a safe and effective way of combining your large and small drivers together and really don't want this to turn into an electronics tutorial. I suggest you search for information on matching loudspeakers with amplifiers.
Last edited:
Oh dear! I'm afraid that sounds like my patience is beginning to wear thin! 😀
I'm happy to help, but let's stick to a viable plan.
Please report back when your project is underway, I'll be interested to know how you get on.
I'm happy to help, but let's stick to a viable plan.
Please report back when your project is underway, I'll be interested to know how you get on.
I was just asking additional stuff for future reference. Thank you for the help, i'll try your initial suggestion when the amp arrives.