It's real glass, they call it "float" it is not hardened. the holes are made with a waterjet cutting machine. the stainless support, I made myself. Only need a laser cutting machine and a press brake to bend it 🙂
Cool! What crossover frequencies and slopes are you using? The Neo 10 is going to be doing some pretty hairy stuff off the vertical axis lower than the RAAL can go. Any issues in practice?
My new Open Baffle babies are ready
Details please. Loving the B&W theme even on the woofer cones. Sweet.
Greg
If those doors are ~ 2m high then that speaker is huuuuuuuuge. I have to admit that they look really good, nice job!
I have to make a baffle large due to low QTS of woofers ~0.3 also there is a bitumen matt between front baffles to low resonance.
Crossed at 175hz. Still not enough!!!!
Crossed at 175hz. Still not enough!!!!
Jeez! What a look! Are you satisfied with the sonic result? I have SFR200s but they're not roded enough.
Well! This is what I'm working on at the moment. I think coils don't do good for Sonido.
I would drop the crossover to sub 150hz and biamp. I have never heard of Sonido but I assume the woofers are 16" (400mm) and the mid is 8" (200mm) so yes the speaker is as tall as me (1.75m)! Yikes!
But they are so beautiful I assume the WAF is pretty high too.😉
