You mean the spreadsheet is correct? You have now 1 full kit + 2x option 1 + 2x option 2.
From your post here I am wondering if it is 1 full kit + 1x option 1 + 1x option 2.
Thanks to clarify.
hi alex.
i decided just for 1 full kit and 1 times option 1 and option 2.
thx
Hi Alex, could you count me in for 1 full kit, option 1 and 2 and Europe component groupbuy? Thanks for your efforts!
Robin
Hello Robin,
No problem for the PCB, as for the components I am not managing that one.
Please send me your address using MP.
Thanks.
Spreadsheet updated just now with MP and messages on the thread.
Still 25 confirmations missing, thanks to send me your updated request for the missing ones (people without ok on column I).
CG UGS Muse v2.0 (DiyAudio 2020) - Google Sheets
Still 25 confirmations missing, thanks to send me your updated request for the missing ones (people without ok on column I).
CG UGS Muse v2.0 (DiyAudio 2020) - Google Sheets
One more thing, I quickly checked and the control board seems able to support the connection of another encoder, which was not intended at first but gives another control option for the preamp.
So we could think about a different firmware supporting dual encoder (like I did on my current proto DAC).
Source selection would be by rotating the left encoder and I would use the push button integrated to control the preamp as well.
Some shortcut on current front panel switch (long press) would disappear then, but is it an issue...? After using the preamp for a long time I don't think it is as everything is configurable anyway through the setup menu.
Just in case if some are interested in the future by this option.
So we could think about a different firmware supporting dual encoder (like I did on my current proto DAC).
Source selection would be by rotating the left encoder and I would use the push button integrated to control the preamp as well.
Some shortcut on current front panel switch (long press) would disappear then, but is it an issue...? After using the preamp for a long time I don't think it is as everything is configurable anyway through the setup menu.
Just in case if some are interested in the future by this option.
One more thing, I quickly checked and the control board seems able to support the connection of another encoder, which was not intended at first but gives another control option for the preamp.
So we could think about a different firmware supporting dual encoder (like I did on my current proto DAC).
Source selection would be by rotating the left encoder and I would use the push button integrated to control the preamp as well.
Some shortcut on current front panel switch (long press) would disappear then, but is it an issue...? After using the preamp for a long time I don't think it is as everything is configurable anyway through the setup menu.
Just in case if some are interested in the future by this option.
hi alex.
i would prefer the dual encoder design.
thx.
hi alex.
i would prefer the dual encoder design.
thx.
I’ll happily take whatever I can get but would also prefer two encoders instead of all those switch’s. If remote control can do what the switches do I would simply omit them
- Home
- Amplifiers
- Pass Labs
- UGS-muse preamp GB