Hello everybody.
Right this is exactly what I thought when I saw all the messages posted here 😀
Ok I am pleased to see such an interest again and let's go then.
I am not sure this is the right place to start a GB but at least let me summarize the list of person that seems interested here.
Ine : 1 PCB set ?
Twitchie : 1-2 PCB sets
Guyisme : 3 MC board sets ?
Gionag : 1 PCB set ?
Fencki : 1 PCB set ?
Mensing : 1 PCB set
Itsallinmyhead : 1 PCB set ?
Kk74 : 1 PCB set ?
Fabian85 : 1 PCB set ?
Eriksson : 1 PCB set ?
Myl : 1 PCB set
Ernesternest : 1 PCB set
Norgaard : 1-2 PCB sets
Dennis Hui : 1 PCB set
Astromo : 1 PCB set ?
Oneminde : 1 PCB set ?
I would prefer as much as possible to handle full PCB set if ok for you guys (Guyisme, by MC board you mean only the MCU board?).
Also I will take this opportunity to keep adjusting the MCU FW for the trigger part (sorry Jacek for the delay, I am taking care of this).
So let me start then to get some pricing based on the above quantities.
I am busy at work and on another project being a DAC as some knows already here but I will try my best to be reactive.
Right this is exactly what I thought when I saw all the messages posted here 😀
Ok I am pleased to see such an interest again and let's go then.
I am not sure this is the right place to start a GB but at least let me summarize the list of person that seems interested here.
Ine : 1 PCB set ?
Twitchie : 1-2 PCB sets
Guyisme : 3 MC board sets ?
Gionag : 1 PCB set ?
Fencki : 1 PCB set ?
Mensing : 1 PCB set
Itsallinmyhead : 1 PCB set ?
Kk74 : 1 PCB set ?
Fabian85 : 1 PCB set ?
Eriksson : 1 PCB set ?
Myl : 1 PCB set
Ernesternest : 1 PCB set
Norgaard : 1-2 PCB sets
Dennis Hui : 1 PCB set
Astromo : 1 PCB set ?
Oneminde : 1 PCB set ?
I would prefer as much as possible to handle full PCB set if ok for you guys (Guyisme, by MC board you mean only the MCU board?).
Also I will take this opportunity to keep adjusting the MCU FW for the trigger part (sorry Jacek for the delay, I am taking care of this).
So let me start then to get some pricing based on the above quantities.
I am busy at work and on another project being a DAC as some knows already here but I will try my best to be reactive.
If I remember correctly, you can potentially daisy-chain multiple motherboards and control them with 1 MCU? I'm thinking of trying to assemble a multichannel UGS (still have 2 sets from the previous GB).
I'm therefore adding myself to the list:
Ine : 1 PCB set ?
Twitchie : 1-2 PCB sets
Guyisme : 3 MC board sets ?
Gionag : 1 PCB set ?
Fencki : 1 PCB set ?
Mensing : 1 PCB set
Itsallinmyhead : 1 PCB set ?
Kk74 : 1 PCB set ?
Fabian85 : 1 PCB set ?
Eriksson : 1 PCB set ?
Myl : 1 PCB set
Ernesternest : 1 PCB set
Norgaard : 1-2 PCB sets
Dennis Hui : 1 PCB set
Astromo : 1 PCB set ?
Oneminde : 1 PCB set ?
Adams_Leo : 1 PCB set ?
JoeyDD: 2 PCB sets
I'm therefore adding myself to the list:
Ine : 1 PCB set ?
Twitchie : 1-2 PCB sets
Guyisme : 3 MC board sets ?
Gionag : 1 PCB set ?
Fencki : 1 PCB set ?
Mensing : 1 PCB set
Itsallinmyhead : 1 PCB set ?
Kk74 : 1 PCB set ?
Fabian85 : 1 PCB set ?
Eriksson : 1 PCB set ?
Myl : 1 PCB set
Ernesternest : 1 PCB set
Norgaard : 1-2 PCB sets
Dennis Hui : 1 PCB set
Astromo : 1 PCB set ?
Oneminde : 1 PCB set ?
Adams_Leo : 1 PCB set ?
JoeyDD: 2 PCB sets
Yes one complete set of UGS-Muses. I am lucky enough to have the design & PCB worked out for the UGS4 so will use that gain stage 🙂
Yes this is possible, the SPI Muse addressing is fully configurable.
However the current MCU firmware only supports 2 stereo channels at the moment.
Dear Alex,
Even if I already built the UGS I can’t miss the chance to get another set of pcbs
Please add my name in your list 🙂
Thanks and Regards,
Enrico
Even if I already built the UGS I can’t miss the chance to get another set of pcbs
Please add my name in your list 🙂
Thanks and Regards,
Enrico
I confirm my interest for 1 whole set (maybe two... let's see the final pricing).
In the meanwhile, i don't know how you used to handle this last time, but, may I suggest to share in advance some bom/schematic in order to be preapared for the damage ?
thanks ! 🙂
In the meanwhile, i don't know how you used to handle this last time, but, may I suggest to share in advance some bom/schematic in order to be preapared for the damage ?
thanks ! 🙂
Great Alex, thanks for the new GB opportunity.
Yes, I need 3 main controller boards. Also please add 1 left preamp board and 1 right preamp.
I hope it’s all clear now.
Best regards...
Yes, I need 3 main controller boards. Also please add 1 left preamp board and 1 right preamp.
I hope it’s all clear now.
Best regards...
Schematics and BOMs are located here : <<UGS - Muse edition>> - 30058092 - sur le forum <<Amplis et Preamplis>> - 1056 - du site Homecinema-fr.com😉
Really surprising to see how many people still have matched quads of 2SK170/2SJ74's.
🙂
Cheers,
Patrick
🙂
Cheers,
Patrick