What material is for the inductors ?
If it's a pure bridge - better wind both on one core.
Hi All
This is My Final circuit with Over Temp.,Over Current,Auto Limiter,CLIP and DC Protect with Delayed ON.
I designed a PCB without Auto limiter,CLIP & DC Protect
It can give an OUTPUT 1,875Watt @4Ohm Load (3xIRFP250)
This is My Final circuit with Over Temp.,Over Current,Auto Limiter,CLIP and DC Protect with Delayed ON.
I designed a PCB without Auto limiter,CLIP & DC Protect
It can give an OUTPUT 1,875Watt @4Ohm Load (3xIRFP250)
@opor
same here too i dont have any test instruments, only ears and fingertips, it is a lot better in sound compared to the authors circuit. i have tested it in mid tops sound is clear. very nice
same here too i dont have any test instruments, only ears and fingertips, it is a lot better in sound compared to the authors circuit. i have tested it in mid tops sound is clear. very nice
opor, gerry_morales
You only need a sound card for thd and imd measuremnts..even motherboard bundled ones have <0.01.
You only need a sound card for thd and imd measuremnts..even motherboard bundled ones have <0.01.
bridging ucd amplifier
Hi Manojtm
greetings having made ucd amp and playing it at 60 dc rails its working ok do you have any schematic BRIDGED ir2110 amp or schematic for this amp bridged can you help out
warm regards
andrew lebon
Hi Manojtm
greetings having made ucd amp and playing it at 60 dc rails its working ok do you have any schematic BRIDGED ir2110 amp or schematic for this amp bridged can you help out
warm regards
andrew lebon
@cpx
hi bro thanks for the tips, anyway i will try to send it to a friend of mine sir irvyne jay, he had the test instruments to test it. i only know how to use dmm.
hi bro thanks for the tips, anyway i will try to send it to a friend of mine sir irvyne jay, he had the test instruments to test it. i only know how to use dmm.
Hi Andrew !
The schematic is relatively correct , I know the author , he's just an amatuer theorist😀3
Catch a working bridge😉
No..blue and yelow are lower..look here:
Toroids - Micro Metals / Iron Powder
Red is just more famous..i also used red because i had no space for others since more turns were needed for the same inductance.
Toroids - Micro Metals / Iron Powder
Red is just more famous..i also used red because i had no space for others since more turns were needed for the same inductance.
Last edited: