how much a dhr turbo amp pcb is worth ? i ask someone on ebay to produce me two dhr turbo amp boards
he says he wants 50 pounds for two boards
50 quid for two boards that is very expensive ?
andrew lebon charging only hundred pounds which includes everything components the lot but he dnt have ebay but western union. i dont have western union.
he says he wants 50 pounds for two boards
50 quid for two boards that is very expensive ?
andrew lebon charging only hundred pounds which includes everything components the lot but he dnt have ebay but western union. i dont have western union.
ajay are you talking to a guy called skylinejoker on ebay that is me that wants the board made the guy on ebay got similar name to you.
hi all... I am newbie in electronics and got interested with DX turbo made by Carlos. I am planning to build one for my room and i think it will serve me well. I checked the parts on the store and it is all available. Thank you Carlos for the amp. I want also to ask Alex for the pcb layout of his power supply which uses two bridged diodes and series of caps. I love the design. It's very neat and simple! http://www.diyaudio.com/forums/images/icons/icon14.gif I hope he can send one through my email. lcastro77@yahoo.com or post it here along with the parts he used.
A million thanks!
JULIUS
A million thanks!
JULIUS
DHR Turbo is an amplifier to enjoy.... a good thing into this life is to enjoy
... to enjoy friends, family, a good juice, a windy brazilian beach and good company.
... to enjoy friends, family, a good juice, a windy brazilian beach and good company.
An externally hosted image should be here but it was not working when we last tested it.
Re: I hope you enjoy the amplifier...when made, please let me know
uncle charly .......always have very pretty girls and very pretty amps arround him ha ha ha
destroyer X said:
uncle charly .......always have very pretty girls and very pretty amps arround him ha ha ha
I had a dream... and this good friend you see was telling
With the arms openned.
-"you were not happy because you had not listened DHR Turbo!"
With the arms openned.
-"you were not happy because you had not listened DHR Turbo!"
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
And Mademoiselle Pauline said
- " DHR Turbo is so good in RRio de Janeirroh as it is good in RRecife "
Enjoy DHR Turbo folks...i ensure you will not complain!
Satisfaction guaranteed!
regards,
Carlos
- " DHR Turbo is so good in RRio de Janeirroh as it is good in RRecife "
Enjoy DHR Turbo folks...i ensure you will not complain!
Satisfaction guaranteed!
regards,
Carlos
An externally hosted image should be here but it was not working when we last tested it.
you have a lovely daughter there and a lovely place too... I watched the video you did on youtube about the amp and it sound very clear and defined.
PCB's Made for anyone
Hi everyone
I have just made these 2 dhrturbopcb1 pcb's for joka22.
I can make pcb's from pdf files etc etc.
The pcb image is photo plotted at high resolution then fine spray etched onto industry standard fr4 pcb board. Then finally they are roller-tinned to make the board easy to solder too then fully drilled ready to be built up by you.
Very good prices for One offs and low volume amounts and I post worldwide.
No silkscreen No photoresist just high class industry standard pcb boards made from your design finished in roller-tin and pre-drilled
Thanks Ajay
Hi everyone
I have just made these 2 dhrturbopcb1 pcb's for joka22.
I can make pcb's from pdf files etc etc.
The pcb image is photo plotted at high resolution then fine spray etched onto industry standard fr4 pcb board. Then finally they are roller-tinned to make the board easy to solder too then fully drilled ready to be built up by you.
Very good prices for One offs and low volume amounts and I post worldwide.
No silkscreen No photoresist just high class industry standard pcb boards made from your design finished in roller-tin and pre-drilled
Thanks Ajay
Attachments
Finally Alex mm emailed me the files I need for DX amplifier made by Carlos. A million thanks my friends. I can't wait to build the this amp on weekend. Ill be posting some of the pics soon.
Regards
Julius
Regards
Julius
- Status
- Not open for further replies.