I have had a cunning plan regarding my massive, heavily braced BB ply boxes........
Pre-made sub-woofer boxes anyone?!
I can drop 15-18 inch subs in them (sealed) without probs and used DSP to sort the FR....
Have them hidden off either side of the spheres and I can keep the simple looks of the sphere as they are now.
Pre-made sub-woofer boxes anyone?!
I can drop 15-18 inch subs in them (sealed) without probs and used DSP to sort the FR....
Have them hidden off either side of the spheres and I can keep the simple looks of the sphere as they are now.
That's a splendid reuse idea. Should work well. Maybe one of these 80lb bad boys with 34mm xmax will fit in it?
LMS-Ultra 5400 18″ Driver | TC Sounds
LMS-Ultra 5400 18″ Driver | TC Sounds
Nice!
Can't see where I could get them in the UK though.
I am thinking:
Alpine
Or even a couple of these - but they could be a long shot....:
Auna Coloss 18 Car Subwoofer 18" Sub 6000W max. | auna-multimedia.co.uk
Can't see where I could get them in the UK though.
I am thinking:
Alpine
An externally hosted image should be here but it was not working when we last tested it.
Or even a couple of these - but they could be a long shot....:
Auna Coloss 18 Car Subwoofer 18" Sub 6000W max. | auna-multimedia.co.uk
An externally hosted image should be here but it was not working when we last tested it.
That's a very nice polar response.
I like Alpine SWR's - great values. I have designed several push-pull 6th order slot loaded bandpass subs with them. Here is one for dual 12's for use in the back trunk of a car with the output port coming out of the little flip down port for transporting skis etc.
http://www.diyaudio.com/forums/subwoofers/264737-pp-slot-loaded-sub-alpine-swr-12d2.html
I like Alpine SWR's - great values. I have designed several push-pull 6th order slot loaded bandpass subs with them. Here is one for dual 12's for use in the back trunk of a car with the output port coming out of the little flip down port for transporting skis etc.
http://www.diyaudio.com/forums/subwoofers/264737-pp-slot-loaded-sub-alpine-swr-12d2.html
Just read through that- great job x!
The one down side to the alpine subs is I hate the silver cone!
Wonder if I could spray them Matt black?
Might just lower the FS and sensitivity a touch......
Hmmmmm.
The one down side to the alpine subs is I hate the silver cone!
Wonder if I could spray them Matt black?
Might just lower the FS and sensitivity a touch......
Hmmmmm.
Hey thanks. I have not actually heard it - but the builder tells me it sounds good. 🙂. It's like that for many of my speaker designs.
I think a thin coat of matte black spray paint will work just fine. Mask the rubber roll surrounds though.
I think a thin coat of matte black spray paint will work just fine. Mask the rubber roll surrounds though.
Really nice distortion result, bushmeister!
What are the angle increments in your polar response graph?
What are the angle increments in your polar response graph?
Really nice distortion result, bushmeister!
What are the angle increments in your polar response graph?
Hi, the last one was about 10 degrees. At 80 cm.
I measured the distance, but it was done in my cramped study so lots of room effects.
Got there finally!
Nearly killed me but worth it!
I have clearance from the family to have these on show now!
Sound = sublime!
Nearly killed me but worth it!
I have clearance from the family to have these on show now!
Sound = sublime!

Attachments
Last edited:
Got there finally!
Nearly killed me but worth it!
I have clearance from the family to have these on show now!
Sound = sublime!
![]()
Truly loving it !!!
🙂
Gorgeous design. Congratulations on a super duper fine speaker. That was very fast work!

p.s., can we get some closeup glamour shots from different angles?
Since on a ball and socket stand mount you could orient them vertically if you wanted. Wonder if they sound better/worse in such a configuration?

p.s., can we get some closeup glamour shots from different angles?
Since on a ball and socket stand mount you could orient them vertically if you wanted. Wonder if they sound better/worse in such a configuration?
Last edited:
Congrats 🙂
Truly loving it !!!
🙂
Gorgeous design. Congratulations on a super duper fine speaker.
Since on a ball and socket stand mount you could orient them vertically if you wanted. Wonder if they sound better/worse in such a configuration?
Cheers Guys!
X - I will have to play around with different angles over the next few days.
At the moment I am just enjoying them - they go stupidly loud cleanly.
I still have some cosmetic touches to sort out, then will post some better pics - I was up until 2am last night getting the second one up and running - so they still need another coat of matt varnish on the globes and I have ordered some black strip trim to give the junction between the composite baffle and globe a neater finish.
They look so much smaller than the XBush Mark 1 - I have even been told I can keep them in my study if I wish - but I think they will go ultimately into my listening room with some big subs below as I have planned for a while.
Hi Bwaslo,
Not really, as you know the beauty of the synergy horn is that no matter how close to them you are, they are effectively single point sources, so they are perfect as my high end monitors in the study.
As a result, they haven't been moved and are still either side of my desk, so no need to make any subwoofers at present. To be honest the bass output from them is so good I can't see the need anyway at present.
I have just treated myself to an openDRC-DA8, so am playing with my other multiway DIY speakers, trying different slopes and phase corrections.
If/when I do move these out to a dedicated space, and add some big subwoofers I will update this thread, but to be honest these are so good where they are, I am just enjoying listening to them - I haven't thought about changing anything since my last post - which I suppose is a good sign!
Not really, as you know the beauty of the synergy horn is that no matter how close to them you are, they are effectively single point sources, so they are perfect as my high end monitors in the study.
As a result, they haven't been moved and are still either side of my desk, so no need to make any subwoofers at present. To be honest the bass output from them is so good I can't see the need anyway at present.
I have just treated myself to an openDRC-DA8, so am playing with my other multiway DIY speakers, trying different slopes and phase corrections.
If/when I do move these out to a dedicated space, and add some big subwoofers I will update this thread, but to be honest these are so good where they are, I am just enjoying listening to them - I haven't thought about changing anything since my last post - which I suppose is a good sign!
bushmeister good work ! They look nice in the "ball". Has there been an improvement in acoustic out? Do you have measurements in a round and square cabinet?
bushmeister good work ! They look nice in the "ball". Has there been an improvement in acoustic out? Do you have measurements in a round and square cabinet?
Thanks very much. If the measurements aren't in the two threads, they will be somewhere in my laptop....probably!
If I remember right the measurements were broadly similar, maybe slightly better in the balls.
Listening was very similar. They still sound fantastic but i have so many speakers at present i don't listen to them enough!
I am really enjoying another build i did with stacked balls which is a four way more traditional build, but with top end drivers. Not enough hours in the day!
bushmeister
They are extraordinary, I saw the snowman. Tw SS, mid VOLT and bass SB A ?. I do not see the fourth way. From what distance do better sound than these unity horn?
Do you have any more detailed information on this system on the Internet? I'd like to look.
They are extraordinary, I saw the snowman. Tw SS, mid VOLT and bass SB A ?. I do not see the fourth way. From what distance do better sound than these unity horn?
Do you have any more detailed information on this system on the Internet? I'd like to look.
- Status
- Not open for further replies.
- Home
- Loudspeakers
- Multi-Way
- The XBush Mark 2. A synergy/Unity horn of spherical proportions