There were two separate listings and one was dual rail but I just recombined them to same listing with two options for single or dual rail.
https://xrkaudio.etsy.com/listing/699792666
https://xrkaudio.etsy.com/listing/699792666
Can you describe what we are seeing here? If you have a schematic please screenshot it and post it. I don’t want to have to unzip an ASC file and open it up in LTSpice etc.
Can you describe what we are seeing here? If you have a schematic please screenshot it and post it. I don’t want to have to unzip an ASC file and open it up in LTSpice etc.
Try bypassing the LT4320 with conventional bridge to see if it works. I have never used the model for LT4320, just know that it works. The cap multiplier is a well designed and tested circuit. I think Jhofland did LTspice simulations on it even. The output should rise from zero to final value about 1.5 to 3v less than the DC rail at the input.
for one rail everything is ok, the problem arises when both rails are connected to GND. With a conventional bridge, the same thing happensTry bypassing the LT4320 with conventional bridge to see if it works. I have never used the model for LT4320, just know that it works. The cap multiplier is a well designed and tested circuit. I think Jhofland did LTspice simulations on it even. The output should rise from zero to final value about 1.5 to 3v less than the DC rail at the input.
You might be shorting it out by doing that. Please simulate the power trafo to galvanically isolate the voltage sources from the SLB ground.
- Home
- Group Buys
- The SLB (Smooth Like Butter) Active Rect/CRC/Cap Mx Class A Power Supply GB