I'm quite confident this will be a frequently used measurement in upcoming projects!
I invented Papaland's Stupidity Unit today
of course, Label is ZM for everyday use, feel free to use same prefixes as for Farrad
![]()
Last edited by a moderator:
only me, as sole Proprietor of Unit (Etalon Bearer) , being incapable of measurement
so, by default, all my projects graded as 1ZM

so, by default, all my projects graded as 1ZM

to ZenMod #27124
Hello ZenMod,
nobody can reach 1ZM!
I am working on the bikes - it is springtime! Re-animated one of my 'toys' today. Her name is 'Eleanor'. 93cu.in. or 1530ccm at 10.1 compression ratio is no fun to kick. My right thigh is double as thick as the left one.... 🙄 But she is running again.
Cheers
Dirk

Hello ZenMod,
nobody can reach 1ZM!
I am working on the bikes - it is springtime! Re-animated one of my 'toys' today. Her name is 'Eleanor'. 93cu.in. or 1530ccm at 10.1 compression ratio is no fun to kick. My right thigh is double as thick as the left one.... 🙄 But she is running again.
Cheers
Dirk


Attachments
Last edited by a moderator:

please, just put proper seat, to have some support at least for Butt, if not for Back
I'm doomed in Serbia now - due to wanabee EU Status, all restrictive Regulations imported from EU, while affirmative Regs are evidently left for later
result - there is no ooking way to have Custom bike registered!! Bloody Idiots
edit: I hope you're aware of Keenan's channel... worth every second spent on : Tatro Machine - YouTube
Last edited by a moderator:
been running around hills again chasing non-existent creatures???Hello ZenMod,
93cu.in. or 1530ccm at 10.1 compression ratio is no fun to kick.
My right thigh is double as thick as the left one.... 🙄
But she is running again.
Cheers
Dirk![]()
Last edited by a moderator:
to brianco and ZenMod
Why counterclockwise around the hill?
Because I wanted to hunt GLLLHH (german - left - long- leg- hill- hens). Dangerous creatures! 😱
I wanted to attack from the front.
Give 'em a chance...
Cheers
Dirk
Why counterclockwise around the hill?
Because I wanted to hunt GLLLHH (german - left - long- leg- hill- hens). Dangerous creatures! 😱
I wanted to attack from the front.

Cheers
Dirk

Last edited by a moderator:
T-Bed 2 in progress
hope when I finish 5-6-7 amps I have more on the list, to finally have some time for my bikes🙂

hope when I finish 5-6-7 amps I have more on the list, to finally have some time for my bikes🙂
Attachments
-
IMG_20210515_191936.jpg47.6 KB · Views: 95
-
IMG_20210515_191927.jpg66.1 KB · Views: 85
-
IMG_20210515_183657.jpg92.8 KB · Views: 73
-
IMG_20210515_183620.jpg91.8 KB · Views: 75
-
IMG_20210515_183607.jpg97.1 KB · Views: 81
-
IMG_20210515_183554.jpg112.4 KB · Views: 157
-
IMG_20210515_183522.jpg86.5 KB · Views: 159
-
IMG_20210515_133125.jpg109 KB · Views: 164
-
IMG_20210515_133046.jpg40.8 KB · Views: 163
-
IMG_20210515_133013.jpg95.2 KB · Views: 168
Last edited by a moderator:
to ZenMod #27131
A big chunk of aluminum is always good for big Mosfets at high bias...
Also V-fets will like it. 😉
Greets
Dirk
A big chunk of aluminum is always good for big Mosfets at high bias...
Also V-fets will like it. 😉
Greets
Dirk
this is T-Bed, No.2
so, short of Test Bed, chassis for developing anything having 1ZM value depending of fan speed, I think it's good to at least 300W (both channels) without fan roaring
though, easy to add another 12cm fan, if needed, then it'll go to 400W of heatfor more I would use it for one channel only

so, short of Test Bed, chassis for developing anything having 1ZM value depending of fan speed, I think it's good to at least 300W (both channels) without fan roaring
though, easy to add another 12cm fan, if needed, then it'll go to 400W of heatfor more I would use it for one channel only

Last edited by a moderator:
I'll add this 79% Nickel Permalloy Ring Core for Audio Transformer 25 mm2. Made in USSR. NOS | eBay to spice up your experiments. 😀T-Bed 2 in progress
Attachments
Last edited by a moderator:
don't stress me
thinking how I really need Lottery to solve just 10% of my needs, resulting from all wakoo ideas. little toroids winder is just one of them

anyway, Saga continues again All The Glory, or Public Disgrace ( ZM being unable to keep mouth shut)
thinking how I really need Lottery to solve just 10% of my needs, resulting from all wakoo ideas. little toroids winder is just one of them

anyway, Saga continues again All The Glory, or Public Disgrace ( ZM being unable to keep mouth shut)
Attachments
Last edited by a moderator:
Around my corner of backwoods, we practice the way of Zen by doing it karate style since we have abundance of candy powered small toroid winders. 😀
anyway, Saga continues
again All The Glory, or Public Disgrace ( ZM being unable to keep mouth shut)
IL Penitente 😀😀 that's great
most probably result of so much hanging with Bubba Uncle Bob
let's just call it - Permanent 'Talian Influence

let's just call it - Permanent 'Talian Influence

- Home
- Amplifiers
- Pass Labs
- The Pass Pub: The High-End Off Topic Thread