Zen Mod said:
whazzat ?
toaster ?
No, it's a control unit for pizza heater.
Certified up to 280C 😀
Magura 🙂
luvdunhill said:fugly.com?
ZM: I hope you got my e-mail with voltages.. take your time though 🙂
yes , I got ... but I also got headache ( hehe , almost ) trying to solve all emails I didn't lately ....
this , or next evening ;
I must print that schematic , take a pen and calc .......
am I old , or am I just Old School ?
Magura said:
At least he didn't make it Fugly.dk
Magura 🙂
forgot to cut that line .... what's more important is name of the pic , when you save it 😉
Magura said:
Ya' nutz, making boards that way
Cool job, though...Green! I will say it again: green!!! The only colour you can look at forever😉 You get tired of the reds and blues and blacks. Just take a look at the Drek boards. Mucho prettier than all the other stuff, in the long run.
🙂
steenoe said:
Ya' nutz, making boards that way
Green! I will say it again: green!!! The only colour you can look at forever😉 You get tired of the reds and blues and blacks. Just take a look at the Drek boards. Mucho prettier than all the other stuff, in the long run.
🙂
I guess turquoise will have to be the choice then
Since I can't tell the difference anyway.Actually this was the only way to get this sort of boards. They're 2 Oz copper on PTFE/glass fibre.
Magura 🙂
Aside: Off topic re: transformer wiring. It worked! Works great! I wired the xformer so that primary and secondary both followed effectively, the same plan color scheme = rather than second guess the xformer maker. Thanks for the hints.
FastEddy said:Aside: Off topic re: transformer wiring. It worked! Works great! I wired the xformer so that primary and secondary both followed effectively, the same plan color scheme = rather than second guess the xformer maker. Thanks for the hints.
Now, what's wrong with you?
Can't you stay off topic?
Magura 🙂
mpmarino said:
Yes, thank you, I was wondering why you didn't reply.
Seems a mail has gotten lost 🙁
Are you still building stuff occasionally?
Magura 🙂
mpmarino said:
Soldering ought to be fine training, no? 😉
A good excuse to build a Drek or something 😀
Magura 🙂
All the audio stuff is shelved for the moment. I'm cleaning the shop and parts gathering right now to build meself one of those cnc tabletop mill/routers.
Going to do a steel frame and gantry (welded construction) so I can work some solid aluminum. Should be a fun project.🙂
Going to do a steel frame and gantry (welded construction) so I can work some solid aluminum. Should be a fun project.🙂
are you boyz on same high weed these days ........ hearing about home CNC from US of A and Denmark in few days isn't just coincidence ......
😉
CY :
refresh my memory .... I hope it isn't something health related ?
😉
CY :
refresh my memory .... I hope it isn't something health related ?