The Othorn tapped horn

[SonicSoundVW]

tried to PM him "Josh Ricci has exceeded their stored private messages quota and cannot accept further messages until they clear some space." 🙁

 

[epa]

for 1 b&c 21 152 you need about 4000 watts amp

 

[chrapladm]

You can probably get a hold of him on his website. Data-bass.com

There is a forum there also.

 

[SonicSoundVW]

Ive sent emails, just waiting ^__^ so excited i can barley contain myself. Have to remember to calm down when i start building lol. Anybody in or near MI have othorns?

 

[weltersys]

How would somebody go about getting the plans for the othorn?

Aaron,

The Othorn plans are in post #2, the exterior cabinet width is 24".

Art

 

[sbjacob]

What is the weight of each of these I see on the data base it's 240lbs but on the ProSound Web it says 115lbs unloaded? Thanks
The cabs are 36x36x24" and are around 115lbs unloaded so these would obviously have to be freight shipped. The cabs do have some gouges and scrapes from being moved. That goes with the territory. I have a list of the drivers that work well in the cabs and also adapter plates to fit 18" drivers or 21" drivers.

 

[Josh Ricci]

Depends on the drivers but it should be somewhere around 140-160lbs with the driver.

 

[sbjacob]

Thanks Josh

 

[sbjacob]

Depends on the drivers but it should be somewhere around 140-160lbs with the driver.

Josh what size T-nuts are used on the woofers on these as I'm having 2 built and want to make sure that is correct ? Thanks

 

[NEO Dan]

IIRC Josh used a different type of #10 threaded insert, something like this:

 

[sbjacob]

IIRC Josh used a different type of #10 threaded insert, something like this:

Thank you sir

 

[sbjacob]

They are set to be delivered on the 22nd of this month pretty excited also wondering how they will sound compared to my Danley DBH218.

 

[JSS]

JBL 2241H Speakers Link

Would this would work in an Othorn?
I can get it used for $200 each.
Or should I just save and wait a bit for B&C 21SW152?

Thanks,
Jeff

 

[NEO Dan]

The cone would likely fail under the pressure of the Othorn.

 

[JSS]

Thanks for the info Dan.

I wonder if there are other horns these would work on.
I will keep searching...

 

[Neo7656]

Im interested in the plans can you email them. Neo7656 at gmail dot com

 

[Neo7656]

Hello, do you hapen to have the pdf for the othorn woofer? If you do wat will it take to get a copy?

 

[sbjacob]

Othorns arrived

Got my pair of Othorns can't wait to hook them up.

 

[NEO Dan]

And???

 

[sbjacob]

Hope to get around to doing some testing next weekend outside with a pair of SPL td-1's tops I may also bring my Danley DBH218 sub to see how the Othorns stand up to it or it to the Othorns???