Anybody interested, here is a link to my 3D .DWG files. Complete model, and flattened file suitable for CNC or 1:1 print for templating. Also included are .STL files for throat adapter and pole mount spacer (if you use this same pole mount). Pole sockets are the same as my buddy's Turbosound tops have, and I like the lack of moving parts: https://www.ebay.com.au/itm/232994189072
https://drive.google.com/drive/folders/1jgpS_zafZW9P-vrhAr3BYsbNj75FDpb2?usp=drive_link
https://drive.google.com/drive/folders/1jgpS_zafZW9P-vrhAr3BYsbNj75FDpb2?usp=drive_link
Hi All,
User @woolwool asked for my Fusion 360 files, so I thought I would share them for everyone.
I worked in metric measurements, so that might be useful for the non-North Americans.
Use these files at your own risk. Note my concerns / caveats with my drawings in post 1398.
The files :
- Nested inner horn parts
- The base jig which was created I think by @Jennygirl
- Throat adapter plate top and bottom parts. Again by Jennygirl IIRC.
Syntripp outer panels were cut on the tablesaw so you're on your own for those.
User @woolwool asked for my Fusion 360 files, so I thought I would share them for everyone.
I worked in metric measurements, so that might be useful for the non-North Americans.
Use these files at your own risk. Note my concerns / caveats with my drawings in post 1398.
The files :
- Nested inner horn parts
- The base jig which was created I think by @Jennygirl
- Throat adapter plate top and bottom parts. Again by Jennygirl IIRC.
Syntripp outer panels were cut on the tablesaw so you're on your own for those.