Hi John,
I preferred listening to NX amp for easy listening songs. it's connected to the Diamond 9.5 the two speakers without grill cloth on.
John you will love this amp for sure.
Cheers,
Junie
I preferred listening to NX amp for easy listening songs. it's connected to the Diamond 9.5 the two speakers without grill cloth on.
John you will love this amp for sure.
Cheers,
Junie
We have sent to all who have paid before 9pm gmt+1 yesterday.
9 packages today. Expect 2 - 5 days.
Best regards
Sonny and Miriam Andersen
9 packages today. Expect 2 - 5 days.
Best regards
Sonny and Miriam Andersen
Hi Bonsai,
Would this part (see below) be a good replacement for the 771-PDTA115ET215 in the PSU?
http://www.digikey.ca/product-detail/en/DDTA115ECA-7-F/DDTA115ECA-FDICT-ND/804897?itemSeq=142798384&uq=635255130311996086
Digikey and Mouser are out of stock for this one and they don't plan on renewing.
Thanks
Do
Would this part (see below) be a good replacement for the 771-PDTA115ET215 in the PSU?
http://www.digikey.ca/product-detail/en/DDTA115ECA-7-F/DDTA115ECA-FDICT-ND/804897?itemSeq=142798384&uq=635255130311996086
Digikey and Mouser are out of stock for this one and they don't plan on renewing.
Thanks
Do
Listening to SADE with sweet sounding amp, NX amp.
Wow, now that looks cool!
Great looking setup Junie!
What are the speakers?
Hi Everyone
Junie,
Monster amp, must sound fantastic 🙂 TT cool. On the speakers, unusual that the tweeter and woofer over-lap each other? I am sure the designer had their reasons for some sort of dispersion pattern. Passive radiator design? Do you have a sub?
Ever listened to a MTM design? I like my DynAudio Gemini's
Can you list the other equip as well.
Junie,
Monster amp, must sound fantastic 🙂 TT cool. On the speakers, unusual that the tweeter and woofer over-lap each other? I am sure the designer had their reasons for some sort of dispersion pattern. Passive radiator design? Do you have a sub?
Ever listened to a MTM design? I like my DynAudio Gemini's
Can you list the other equip as well.
I found some at Newark and placed an order. This is until they have no stock left. They won't be replenishing the stock. End of life I believe
Do
Hello Sir,
The Preamp has input selector from Vicol Audio, with Alpha 20 (amb.org) as line stage.
TT is Pro-ject debut 2, Marantz CD63 SE (a bit mods on it which can be found all over the net 😉) and the Wharfedale diamond 9.5 (not the best speaker maybe but I like it very much, I heard some from the same price range but this one is a winner to me. had it since 2007)
For music listening no other speakers connected except the 9.5.
For movies diamond 10.7 for the front, diamond 10.CM for the center and the surrounds are diamond 9.1, 5.1 configuration only 😀.
Never tried MTM yet, maybe in the future if the budget will permit
Sam Bhai, this is my opinion only though the amp might sound better with other speakers, or other setup.
See I have 4 DIY amps and each of them has different character, some CD's/LP's will sound bright with Amp A, warm with Amp B, has harsh mid on Amp C and unrealistic vocals with Amp D. so I have choices and comparison.
I concluded that there is no Perfect amp that can be used as a SINGLE piece to be the center of all music listening and I believe it will matter on many things connected to it i.e. source, line level, interconnects maybe, speakers etc.
Can anyone tell me what they used for F1 and F2? I don't want to place an order at Mouser and pay 20$ shipping just for this. I'm currently finishing the order on Digikey
Thanks
Do
Thanks
Do
The only clip I can find that sort of matches the part number in the BOM is this one. 504-HTC 210M However, I have those and they have to be modified slightly because they have 5mm pin spacing and the holes on the PCB are 2.5mm. They will work by bending the pins.