Smps with IR2153 for audio amplifier

[hien.t.nguyen]

My design an switching power supply use IR2153 + mofet(or IBGT) for audio amplifier

+/-63V,12A (unregular)
+/-15V,800mA for pre amplifier circuit
+12V,800mA for protect circuit,fan,...

size 12x12cm

 

[hien.t.nguyen]

Testing with load is resistor 30ohm(4.2A) + 1 lamp(0.6A) = 4.8A from B+ to B- ( total 126V = 63Vx2)

P = 126x4.8A = 604W not use fan in 2h
Heatsink for mosfet about 95 oC,if use small fan is power higher

 

[panyahui]

Looks good
But it is not EMC
AC input socket mounting holes distance can be passed safety tests?

 

[dudaindc]

My design an switching power supply use IR2153 + mofet(or IBGT) for audio amplifier

+/-63V,12A (unregular)
+/-15V,800mA for pre amplifier circuit
+12V,800mA for protect circuit,fan,...

size 12x12cm

Nice - please keep us posted. 😀

 

[andrewlebon]

nice smps
warm regards
andrew lebon

 

[andrewlebon]

IR2153 SMPS

TRYING IR2153 SMPS
warm regards
andrew lebon

 

[andrewlebon]

IR2153 SMPS

Simple smps ir2153

 

[hien.t.nguyen]

TRYING IR2153 SMPS
warm regards
andrew lebon

Thank all

I have an smps about 2.6kw
+/-100V,26A,use fan for heatsink

 

[andrewlebon]

Hi Hien.t nguyen
greetings you are a proffessional designer and a clever one pm sent
warm regards
andrew lebon

 

[hien.t.nguyen]

here are schematic of smps 2.6kW

 

[andrewlebon]

Hi Hien.t nguyen
greetings very many thanks for schematic my smps has no protection till now i will TRY this smps for SURE thanks for sharing schematic very kind of you
warm regards
andrew lebon

 

[andrewlebon]

Hi Hien.t.nguyen
greetings is this full schematic
1 source of CPR signal
2 overcurrent protection
3 voltage feedback
warm regards
andrew lebon

 

[slshellas]

Hi Hien.t nguyen
Very nice design
What it is the pcb size for your 2.6KW PSU
regards panslspan

 

[hien.t.nguyen]

Hi Hien.t nguyen
Very nice design
What it is the pcb size for your 2.6KW PSU
regards panslspan

Thank your interested

PCB size of smps 2.6KW is 130x150mm,switching transformer use EE55

 

[hien.t.nguyen]

Hi Hien.t.nguyen
greetings is this full schematic
1 source of CPR signal
2 overcurrent protection
3 voltage feedback
warm regards
andrew lebon

Dear Andrewlebon

1. Point CPR is over current protect (about 20A at pri)

3. My smps use IR2153 unregular for main voltage(+/-100V),not need voltage feedback

My smps has been over voltage protect,over current protect,over temperature protect.

regards

 

[hien.t.nguyen]

Hi Andrewlebon

If you want to perfect protect,you can use this schematic

It is protect speaker and power amplifier,DC at output amplifier will be checked and if has incident(DC<>0.7V),power will not operation.

 

[andrewlebon]

Hi Hien.t nguyen
greetings can IRFP460 BE USED i have over 100pcs nice schematic
warm regards
andrew

 

[hien.t.nguyen]

Hi Hien.t nguyen
greetings can IRFP460 BE USED i have over 100pcs nice schematic
warm regards
andrew

yes,IRF460 use very good.

regards

 

[slshellas]

Hi Hien.t nguyen
You have a layout for this schematic #16, ( speaker protect) ?
Regards
panslspan

 

[hien.t.nguyen]

Hi Hien.t nguyen
You have a layout for this schematic #16, ( speaker protect) ?
Regards
panslspan

Thank your interested

I am doing,but not yet

Hope I will complete soon.

regards