Hi Pete,
Thanks for the corrected Schematic. If it's OK I will post that in the build thread too.
Blessings, Terry
Hello guys
I have one of the original NAD-H that OS design and I have the idea about the jumper having them as "through pad" so if the PCB is order it will have solder both sides where jumpers are and just a little spot of solder to them so it will flow both side making a strong connection I just have it the idea to share here 🙂 "I just thought about it today" 😀
I have one of the original NAD-H that OS design and I have the idea about the jumper having them as "through pad" so if the PCB is order it will have solder both sides where jumpers are and just a little spot of solder to them so it will flow both side making a strong connection I just have it the idea to share here 🙂 "I just thought about it today" 😀
Attachments
updated v3.0 files package
Team Slew,
Is there an updated set of files in a zip? Apologies OS if you have already posted these.
I assume folks load up the schematic in LTspice and it will output a list of components...for easy BOM definition?
Will await Jason's Kypton-ND boards. Just picked up a used HP 6634b for some nice IPS testing. I assume OS's tweaks to the Kypton-ND will be value based on not layout based...but perhaps I'm wrong here.
Jason are you thinking about putting an order in for your layout of the Slew v3 boards? I'll be interested in some if you are.
-TJ
Team Slew,
Is there an updated set of files in a zip? Apologies OS if you have already posted these.
I assume folks load up the schematic in LTspice and it will output a list of components...for easy BOM definition?
Will await Jason's Kypton-ND boards. Just picked up a used HP 6634b for some nice IPS testing. I assume OS's tweaks to the Kypton-ND will be value based on not layout based...but perhaps I'm wrong here.
Jason are you thinking about putting an order in for your layout of the Slew v3 boards? I'll be interested in some if you are.
-TJ
A member who lives outside the USA has asked me to order some sanken 2sc3264 2sa 1295 transistors from Newark for him.
They will be just less then $5.00 each.
Do any others want the same. Shipping to me will be free. You will only need to cover price of devices and shipping to you plus a couple of dollars for shipping materials I will need to buy.
Please PM me.
Evan
They will be just less then $5.00 each.
Do any others want the same. Shipping to me will be free. You will only need to cover price of devices and shipping to you plus a couple of dollars for shipping materials I will need to buy.
Please PM me.
Evan
Great price, I purchased those here in Toronto at $17 and not even sure they are orig. I blew up a pair with the DoZ amp, after I never use them.
Right now I have at lest 40-45 Pair MJL4281A and complementary, I hope those will be good for these project.
Greetings
Evan,
My boards arrived today. Thank you for organising the GB and packing them so well.
Sent from my SM-N9005 using Tapatalk
My boards arrived today. Thank you for organising the GB and packing them so well.
Sent from my SM-N9005 using Tapatalk
Hi
Boards for these IPS will be available to us.
I need something to drive my 5pair OPS. I would prefer these IPS. 🙂
Greetings
jwilhelm was kind enough to send me the files to have Kypton-ND boards produced...
any takers?
1 - evanc - 1pair
any takers?
1 - evanc - 1pair
Evan,
I suspect you are going to have to open another group buy thread for this input section. I'll take a pair of those input sections to go with the Krypton-C I already have so I can see how well I can hear a difference.
I suspect you are going to have to open another group buy thread for this input section. I'll take a pair of those input sections to go with the Krypton-C I already have so I can see how well I can hear a difference.
- Status
- Not open for further replies.