I have come across with this provider before but I never actually used it.
Merlin: If You try, I would like your opinion of course 🙂
Merlin: If You try, I would like your opinion of course 🙂
If I try I will let you know. Ricardo FT-1 Russian teflon caps are non magnetic like the FT-3😉
I connected the shield of both R-Core Tx to chassis😱 more body, lows, highs, it's incredible the big improvement.
Ricardo & Nick C3 now 15.33nF
Ricardo & Nick C3 now 15.33nF
That's the correct way. Electrostatic shield goes to IEC ground prong and from there with a short cable to chassis.
I see both as recommended types for highest quality audio.
The parallel combination may give a synergistic boost to the audio performance of the 15n33F capacitance.
FT-1 15,3nF is a real improvement over the previous SM, but I am having some trouble... After the mod, left channel has more hiss than right channel (There is a difference of 9pF between the FT-1) can this be the reason ?
hi
I am looking buy Elna Silmic II or Nichicon Muse (KZ) , Black Gate or other GOOD caps but anybody knows that this a store http://percyaudio.com/Catalog.pdf ?
I am looking buy Elna Silmic II or Nichicon Muse (KZ) , Black Gate or other GOOD caps but anybody knows that this a store http://percyaudio.com/Catalog.pdf ?
I have more gain in the left channel so it is natural I hear more hiss there.
I did not have time to figure it out but I will.
Anyway, the FT-1 are much better than the SM I used before so they will stay 🙂
I did not have time to figure it out but I will.
Anyway, the FT-1 are much better than the SM I used before so they will stay 🙂
I am using the initial 48dB (28v) version with 33r as source resistors.
In this build I have the RC filter on the second stage and on the buffer.
It is "burning" nicely and sounds better every time. 🙂
Thank you for your suggestion and sampling work.
In this build I have the RC filter on the second stage and on the buffer.
It is "burning" nicely and sounds better every time. 🙂
Thank you for your suggestion and sampling work.