- On pictures i saw 4 potentiometers. Which one does what in case i would like to fix it myself?
5V output only (you can change a few hundred mV only)
Hi,
I ordered ViaBlue cat 7 silver network cable and connectors.
Can I connect both side from the cable to the earth on the connector?
Or only one side from the earth to the connector and the other side no earth connection...
NUC8i7BEH (with roon)
Allo usbridge signature
Allo digione signature
Regards,
Rudy
I ordered ViaBlue cat 7 silver network cable and connectors.
Can I connect both side from the cable to the earth on the connector?
Or only one side from the earth to the connector and the other side no earth connection...
NUC8i7BEH (with roon)
Allo usbridge signature
Allo digione signature
Regards,
Rudy
Hi,
I make 2 cables.
1 both ends to the earth and 1 cable 1 end not connected to the earth.
For now I hear no difference, I let the cables play and we will see how it changes or not change.
Regards,
Rudy
I make 2 cables.
1 both ends to the earth and 1 cable 1 end not connected to the earth.
For now I hear no difference, I let the cables play and we will see how it changes or not change.
Regards,
Rudy
Attachments
- My Shanti ouputs around 5.4V, down to 5.2V under load. Is that normal?
- On pictures i saw 4 potentiometers. Which one does what in case i would like to fix it myself?
Yes normal
I see that iFi has a new version of the ipower, ipowerX ( iPower X by iFi audio | New Ultra-Low Noise AC/DC Power Supply with International Travel Adapters ), however it's twice the cost and NO reviews - testing yet. Any update from Allo on Nirvana SMPS?
Super fugly, and with that round mains plug, it looks like it won't fit a middle slot on a standard US plug strip.I see that iFi has a new version of the ipower, ipowerX ( iPower X by iFi audio | New Ultra-Low Noise AC/DC Power Supply with International Travel Adapters ), however it's twice the cost and NO reviews - testing yet. Any update from Allo on Nirvana SMPS?
Super fugly, and with that round mains plug, it looks like it won't fit a middle slot on a standard US plug strip.
Agreed, it also does not have a PE pin or connector, so performance will still be affected by leakage currents. I'm waiting for the Nirvana power supply, based on what has been released by Allo it should be far superior.
Nirvana transformers should arrive next month (from wurth) , we have every component , cables and alu cases in stock (except transformers) and FCC/CE aproval
Of the new IFI , we got reports from dealers that at 2A voltage is 4.96V , 2.5A its 4.86 and 3A its 4.76V
Nirvana is guaranteed 5.00V up to 2.85A and of course it will be significantly cheaper and less noise (0-20Khz tested and 1uV or less of noise at all frequency , including mains) . Of course earthing of DC ground is also included (with a swtich so you can have it floating or earthed). USB connector (female) is also included along with the main cable
Of the new IFI , we got reports from dealers that at 2A voltage is 4.96V , 2.5A its 4.86 and 3A its 4.76V
Nirvana is guaranteed 5.00V up to 2.85A and of course it will be significantly cheaper and less noise (0-20Khz tested and 1uV or less of noise at all frequency , including mains) . Of course earthing of DC ground is also included (with a swtich so you can have it floating or earthed). USB connector (female) is also included along with the main cable
Last edited:
Of the new IFI , we got reports from dealers that at 2A voltage is 4.96V , 2.5A its 4.86 and 3A its 4.76V
Nirvana is guaranteed 5.00V up to 2.85A and of course it will be significantly cheaper and less noise (0-20Khz tested and 1uV or less of noise at all frequency , including mains) . Of course earthing of DC ground is also included (with a swtich so you can have it floating or earthed). USB connector (female) is also included along with the main cable
That sounds excellent!!
The previous iFi has problems powering a Pi 3B in my setup, shown by frequent blinking red Led on the Pi board. Waiting patiently for Nirvana to fix that , and allow switch to to 3B+.Nirvana transformers should arrive next month (from wurth) , we have every component , cables and alu cases in stock (except transformers) and FCC/CE aproval
Of the new IFI , we got reports from dealers that at 2A voltage is 4.96V , 2.5A its 4.86 and 3A its 4.76V
Nirvana is guaranteed 5.00V up to 2.85A and of course it will be significantly cheaper and less noise (0-20Khz tested and 1uV or less of noise at all frequency , including mains) . Of course earthing of DC ground is also included (with a swtich so you can have it floating or earthed). USB connector (female) is also included along with the main cable
The previous iFi has problems powering a Pi 3B in my setup, shown by frequent blinking red Led on the Pi board. Waiting patiently for Nirvana to fix that , and allow switch to to 3B+.
Either that iPower has a fault, or you have that Pi 3B loaded with current hungry USB device(s).
I can boot and use a Pi 3B/B+ using an iPower and various USB bus powered DACs no problem at all. In fact even the somewhat more power hungry Pi 4B boots using an iPower, no blinking LED, nor any lightning bolt icon warning displayed on-screen.
Nirvana transformers should arrive next month (from wurth) ,
Do you have any info about DAC production?
As soon as lockdown is done in India (March 3 is the official date) a short while (around a week as some technicians live outside the local state) we can start mass production
That would be awesome However. it is is likely India will extend the lockdown beyond May 3.
We need a few days to get to full strength ...but we are back ;-)
Congrats
Can't wait for Rev DAC, but also Nirvana PSU, really need one
currently still using this lol 5V Power Supply
- Home
- Vendor's Bazaar
- Shanti Dual LPS 5V/3A , 5V/1.5A