Hi Breizh
Yes 220R is good.
R9, R10, R14, R15, protect gate of Mosfets from oscillations, value is not critical
Just follow the cookbook ...
When you read : "between 150R and 240R" then correct value is ... between 150R and 240R ...
Just take what you have in Drawer
Manu
Yes 220R is good.
R9, R10, R14, R15, protect gate of Mosfets from oscillations, value is not critical
Just follow the cookbook ...
When you read : "between 150R and 240R" then correct value is ... between 150R and 240R ...
Just take what you have in Drawer
Manu
Last edited:
Hi Breizh
.....
Just take what you have in Drawer
Manu
.........
Is life so easy like this ?
........
..... I just love these pictures ........
Attachments
Hi Breizh
Just follow the cookbook ...
Manu
Attachments
Sabath
me thinks that I wrote you already ......
slight delay , due to Paypal boyz confusion , regarding difference in residence of my ( legal ) bank account , and residence of ......... me
paypal doesn't cover Serbia ( and newer will be ) , so I have bank account opened in Hungary
long and old story , but always complicated
me thinks that I wrote you already ......
slight delay , due to Paypal boyz confusion , regarding difference in residence of my ( legal ) bank account , and residence of ......... me
paypal doesn't cover Serbia ( and newer will be ) , so I have bank account opened in Hungary
long and old story , but always complicated
Very sorry
Sure you did have the link to Vendor baz.
Being extremely dumb I missed the bit where it says click here Job done!
Going to give it one other try.
But may need "extremely easy step by step instructions for extremely dumb Bksabath"
Ps Long old and COMPLICATED stories always make me want to curl up in a corner just in case the Square root of minus 1 is out to get me.
Tanks again
Sure you did have the link to Vendor baz.
Being extremely dumb I missed the bit where it says click here Job done!
Going to give it one other try.
But may need "extremely easy step by step instructions for extremely dumb Bksabath"
Ps Long old and COMPLICATED stories always make me want to curl up in a corner just in case the Square root of minus 1 is out to get me.
Tanks again
But may need "extremely easy step by step instructions for extremely dumb Bksabath"
Not to worry. I have one of these kits too. Not possible that you are dumber than I, and I'm giving it a whirl. Still hemming and hawing over heatsinks. I just need to get busy!
Russellc
Well Maybe a Dumb competition is out of order.
But give you one
Woke up this morrow and decided to print PCB
Printer just does not want to and 3 hour later I got enoug ink on my fingher tips that Girl friend worries if started to wear make up.
(don't pick your nose mummy use to tel me)
PS
I meant Step by step instructions just to buy the things.
Pumpkin gide is preaty good and nice read.
But give you one
Woke up this morrow and decided to print PCB
Printer just does not want to and 3 hour later I got enoug ink on my fingher tips that Girl friend worries if started to wear make up.
(don't pick your nose mummy use to tel me)
PS
I meant Step by step instructions just to buy the things.
Pumpkin gide is preaty good and nice read.
Last edited:
Very sorry
Sure you did have the link to Vendor baz.
Being extremely dumb I missed the bit where it says click here Job done!
.....
naah
no click on any button
mail or PM is usually enough
I want to order the following values :
- C3 : WIMA MKS4 1uF/100V
- C4/C5 : MKP 6.8uF/100V
- C6 : WIMA MKS4 220nF/100V
- C7/C9 : same as C3
- C11/C12 : same as C3
Anything wrong ?
No question for C8/C10/C13/C14...
No 5pf mica in my favourite shop, only 4.7pF ceramic...
Any wrong with red LED ? I have a stock....
- C3 : WIMA MKS4 1uF/100V
- C4/C5 : MKP 6.8uF/100V
- C6 : WIMA MKS4 220nF/100V
- C7/C9 : same as C3
- C11/C12 : same as C3
Anything wrong ?
No question for C8/C10/C13/C14...
No 5pf mica in my favourite shop, only 4.7pF ceramic...
Any wrong with red LED ? I have a stock....
- Home
- Amplifiers
- Pass Labs
- Pumpkin preamp - ordered by Steen , official making thread