I am always happy when I have the opportunity to contribute to this beautiful thread with somethings usefull...
Socks are like caps.
The best socks are no socks...
Bon appétit
Socks are like caps.
The best socks are no socks...
Bon appétit
Manu said:
Me too 😀
Since in this thread, the notion of usefulness is sometimes inverted, then...
p.s. Since socks are like capacitors, the moral of the story must be: Poor socks smear the soundstage! 😀
regarding socks and sockets 😉
AR2 sent me few files these days .....
little Pumpie & Shunty test
AR2 sent me few files these days .....
little Pumpie & Shunty test
Pumpkin and Shunty boards arrive!
Hooray! 😀
Arrived Monday -- beautiful work Choky and Oly.
Now to get to work.
Steve Z
Hooray! 😀
Arrived Monday -- beautiful work Choky and Oly.
Now to get to work.
Steve Z
Re: regarding socks and sockets 😉
I have finally finished Shuntys and I was very pleased with improvement it made over my previous power supply. What is the most apparent is how low is the noise floor. On the measurement it shows aprox. -93dB! It is rare to see that level with analogue equipment. This is the measurement normally reserved for the digital stuff. Shunty is very complex power supply but it is well justified based on the results.
to the master.
Zen Mod said:
I have finally finished Shuntys and I was very pleased with improvement it made over my previous power supply. What is the most apparent is how low is the noise floor. On the measurement it shows aprox. -93dB! It is rare to see that level with analogue equipment. This is the measurement normally reserved for the digital stuff. Shunty is very complex power supply but it is well justified based on the results.
to the master.
Also added up the thd ?
(you mean it makes less noise ? Thatsnogood)
Manny Ribera is ready for some parler time at the "i don't hear a bleading diff cause i'm deaf" thread.
(you mean it makes less noise ? Thatsnogood)
Manny Ribera is ready for some parler time at the "i don't hear a bleading diff cause i'm deaf" thread.
jacco vermeulen said:
We compensate for it on this thread
😀 I am getting there too. All boards are fully built. Cabinet is ready, some wiring pending.🙂
Hi!
This case is same with case of another guy,do you have a twin brother?
Regards zeoN_Rider
This case is same with case of another guy,do you have a twin brother?
Regards zeoN_Rider
Re: Re: Hi!
nope ......... his twin brother is a poooftahhh!
hehe
now - seriously - envelope with his name is in my drawer almost 10 days , but I just didn't have free time ........... seems that (finally) every bookie agency around me wants genuine winshit .......
zeonrider said:
spavleski said:
nope ......... his twin brother is a poooftahhh!
hehe
now - seriously - envelope with his name is in my drawer almost 10 days , but I just didn't have free time ........... seems that (finally) every bookie agency around me wants genuine winshit .......
😉 Better to be Your twin than "You" in this case, isn't it ?
Rider don't worry too much - it will come.
Rider don't worry too much - it will come.
Re: Re: regarding socks and sockets 😉
hehe
Shunty is probably less complex than TL072 , but I can bet that I can make it singbetter than 072 😉
anyway - let us know your impression - what's difference in sound between shared (between channels) generic PS and this one ..... "complex" 😉
😉
btw - as I said before - Masao Noro's shunt reg is example of elegance ; Shunty is .......... Shunty .
AR2 said:
I have finally finished Shuntys and I was very pleased with improvement it made over my previous power supply. What is the most apparent is how low is the noise floor. On the measurement it shows aprox. -93dB! It is rare to see that level with analogue equipment. This is the measurement normally reserved for the digital stuff. Shunty is very complex power supply but it is well justified based on the results.
hehe
Shunty is probably less complex than TL072 , but I can bet that I can make it singbetter than 072 😉
anyway - let us know your impression - what's difference in sound between shared (between channels) generic PS and this one ..... "complex" 😉
😉
btw - as I said before - Masao Noro's shunt reg is example of elegance ; Shunty is .......... Shunty .
Hi ZM,
I powered up the shunty without the fuses but still blew out the R21 & R22 on both channels. Are you sure they can be rated mere .25W as stated in the cook book. I should have checked it earlier at .25W the max current they can take is only about 200 ma. Actually I used the digikey id PPC4.7BCT-ND - RES 4.7 OHM .50W 5% MF FUSIBLE.
I also have another problem the secondary voltage is measuring around 60V on my cheap DMM. This reading I am not willing to believe yet, because the low batt indicator is also on on the DMM, so tomorrow I will get new batteries and measure again.
Anyway, should I try shorting out R21 & 22 for now till I order replacements and go ahead?
Regards,
Dinesh
I powered up the shunty without the fuses but still blew out the R21 & R22 on both channels. Are you sure they can be rated mere .25W as stated in the cook book. I should have checked it earlier at .25W the max current they can take is only about 200 ma. Actually I used the digikey id PPC4.7BCT-ND - RES 4.7 OHM .50W 5% MF FUSIBLE.
I also have another problem the secondary voltage is measuring around 60V on my cheap DMM. This reading I am not willing to believe yet, because the low batt indicator is also on on the DMM, so tomorrow I will get new batteries and measure again.
Anyway, should I try shorting out R21 & 22 for now till I order replacements and go ahead?
Regards,
Dinesh
Re: Re: Re: regarding socks and sockets 😉
Zen Mod said:
anyway - let us know your impression - what's difference in sound between shared (between channels) generic PS and this one ..... "complex" 😉
Please do not let me describe the sound. It sounds rally good.
