mpmarino said:Are you gonna try stikin dem tubez in dem??
edit: WoW😱 dem tubez is big! and complicated!
compare it :
6H13C (AKA 6AS7) against 12AT7
mpmarino said:I got new toys today too!
Guess...
drill shaft?
(damn ya ..... teasin poor serb in guessing tech names in Engrish)
Collet closer, adapter, and nose protector for my non green lathe. Oh and a bunch of used US collets.
It's a rare item to find as original South Bend part but a guy I know is having them made like the original - only better.
It's a rare item to find as original South Bend part but a guy I know is having them made like the original - only better.
Zen Mod said:
You mean the thingie between the spanner wrench and the adapter? You screw it on the spindle to protect the spindle threads because you took the chuck off. Also it helps to eject the adapter if it gets stuck.
Your'e right master ZenMod... family buissnes, work and such thing's is due to my silence.. last few day's.
Problem with gian't noise, hum is nearly solved by now, last funny thing with sensitivity with my 20x gain / no chassis / leachamp, i agree with you, is the comparing to use a pre with a mm/mc input. The reason why some noise/sensitivity appear's when closing -in to gnd, must be that the gain raises som xxx factor while doing this. Right now i must find time to make rest of chassis / inputselector and try all this. (maybee before christmas???) donno.
Going from big big big problem's with this setup/leachamp down to allmost nothing, is that i used the grounding schm. you drawed earlier in thread. 🙂
I am hoping that i can try it out some more next few day's.
Jesper.
HBarske said:
😀
Deutsche Post seems is slower even than Serbian 😉
finally!
so - you're satisfied ?
not really urging you to reply .........
YesYes... no problem... but with gain 20~25
... only slight hum... only volume at max!!! 1/4 Jesper.
lykkedk said:
YesYes... no problem... but with gain 20~25
Jesper.
crazy danske ....... I must always pull words from ya with pliers .........
NoNo please don't be angry 🙂 ... I just didn't have the time to move on before today.
I just tried to setup my
+ dual😀 F4... work's still like a charm ofcause.Soo Morten - aka' Magura San ... Donno about snap's anymore ?? who is buying it now 😀
Jesper.
lykkedk said:
NoNo please don't be angry 🙂 ... I just didn't have the time to move on before today.
I just tried to setup my
Soo Morten - aka' Magura San ... Donno about snap's anymore ?? who is buying it now 😀
Jesper.
I'm not angry......... I'm
snap's ............. I didn't hear that you bought all those sixpacks you owe.......
now is your chance 😉
Nice going, Jesper. Glad to read that your Pumpkin has produced fruit....perhaps fruit flavored schnapps?😀
Magura will have his beer soon... 😀
Well, now that i solved my problem (still learning something everyday!), I hooked it up, and used some hour's listning today.... still marveleous ! The rules...
I have been replacing my big heatsinks, at the with a 3mm Alu' plate, nothing more.. temperature then lies around 45. And stabilisation is improving, when fet's are fried a little i see.
Well back to work -- Lookie lookie new 'dual single-ended input selector'
Jesper.
Well, now that i solved my problem (still learning something everyday!), I hooked it up, and used some hour's listning today.... still marveleous ! The
rules...I have been replacing my big heatsinks, at the
with a 3mm Alu' plate, nothing more.. temperature then lies around 45. And stabilisation is improving, when fet's are fried a little i see.Well back to work -- Lookie lookie new 'dual single-ended input selector'
Jesper.
Magura said:
Whatever you do, don't get the Zumpkin schnapps.
Those Serbs read this forumas DIe-Yourself-Audio.
His beer soon