lykkedk said:
don't forget my man LL ... !
Well, now that i solved my problem (still learning something everyday!), I hooked it up, and used some hour's listning today.... still marveleous ! Therules...
I have been replacing my big heatsinks, at the
seems that I didn't lied to you ................ still
(and you were ready to purchase my pcbs ............. to solve a problem .......
)ugly ........... now just to learn LL to make own pcbs ........ and there will be LL factory in a moment 😉
While listning, i thought it would be fun, with a listninger's view picture...
is left on chatol...
Maybe master sixpack ZenMod 😀 better understand's my Danska gready need for gain, when he see's picture of mine two bear's-like loudspeaker.
Jesper.
is left on chatol...Maybe master sixpack ZenMod 😀 better understand's my Danska gready need for gain, when he see's picture of mine two bear's-like loudspeaker.
Jesper.
lykkedk said:While listning, i thought it would be fun, with a listninger's view picture...
Maybe master sixpack ZenMod 😀 better understand's my Danska gready need for gain, when he see's picture of mine two bear's-like loudspeaker.
Jesper.
hehehe
I know these sissyyyyyyyy spks from time when you have troubles with "whatever"BOSOZ driving F4 .....
and sissy Thorens ( why on earth ppl use so small TTs?) ..............
all that wood on pic is ugly 😉
jacco vermeulen said:
ya cwayzee dutchie..........
ya killing http://vixy.net/ with all these links !
Ya guys are getttin' more and more nutz😀 😀
Just a short remark from LL, with the nasty shoulder injury
Oh, and by the way, Tuborg suck's🙂 That's as close to political as I will get😀
Steen🙂
Just a short remark from LL, with the nasty shoulder injury
Oh, and by the way, Tuborg suck's🙂 That's as close to political as I will get😀
Steen🙂
I bet, Steenoe's prefered pilsner goe's like this :
http://www.royalunibrew.com/Default.aspx?ID=175&PageNum=1
Ain't i right master LL ?
Jesper.
http://www.royalunibrew.com/Default.aspx?ID=175&PageNum=1
Ain't i right master LL ?
Jesper.
lykkedk said:
How could you ever know that????
😀
Oh, and i like a Trappist beer or two, now and then also😉
Hi steenoe
Hello...... steenoe
Nice to see you here. I have read many post of yours.
And I excited to making F4 by your pumping
So, I dropped my project to make aleph XA, and went straight to the F4, and finally I did not regret fot it. I still think that it is the best sounding power amp ever I listened especially for my Lowther speakers. And here now I think I need a .
I really thank you for reliable pumping. People around here is so careful to extol.
😱
Thank you again and still I would have no inspiration for F4 without your exaggeration.😀 😀
Hello...... steenoe
Nice to see you here. I have read many post of yours.
And I excited to making F4 by your pumping
So, I dropped my project to make aleph XA, and went straight to the F4, and finally I did not regret fot it. I still think that it is the best sounding power amp ever I listened especially for my Lowther speakers. And here now I think I need a
.I really thank you for reliable pumping. People around here is so careful to extol.
😱 Thank you again and still I would have no inspiration for F4 without your exaggeration.😀 😀
There is no exaggeration regarding Steeno's ability to inspire on this forum. I bet he could get ZenMod to drink a glass of Zlatorog
-Mal
-Mal
Re: Hi steenoe
jkchoi, you are welcome🙂
Thanks for bringing that line to the Pumpkin thread, where it belongs😀 Yeah, it sounded like an exaggeration back then, but it was pure fact, as you know by now😎 I am very happy to have been helpful at least this one time....
Steen🙂
jkchoi said:Hello...... steenoe
Nice to see you here. I have read many post of yours.
And I excited to making F4 by your pumping
So, I dropped my project to make aleph XA, and went straight to the F4, and finally I did not regret fot it. I still think that it is the best sounding power amp ever I listened especially for my Lowther speakers. And here now I think I need a
I really thank you for reliable pumping. People around here is so careful to extol.
Thank you again and still I would have no inspiration for F4 without your exaggeration.😀 😀
jkchoi, you are welcome🙂
Thanks for bringing that line to the Pumpkin thread, where it belongs😀 Yeah, it sounded like an exaggeration back then, but it was pure fact, as you know by now😎 I am very happy to have been helpful at least this one time....
Steen🙂
Malotron said:There is no exaggeration regarding Steeno's ability to inspire on this forum. I bet he could get ZenMod to drink a glass of Zlatorog
-Mal
Hey Mal, thanks a lot🙂 I tend to get carried away now and then, but usually there is a reason for it😉
When the SIM war starts, is when I get bored😀
Just build, and listen...... pretty simple actually😎
🙂
It's right
I fully agree with you, I am enjoying almost all kind of music with F4. The former driver EL34PP has noisy sound with complicated ochestra and white noise(background) also and very lean sound. I tried to improve it with solid state, but it became worse and worse. But your best recommended F4 showes me the different world with my Lowther. I notied that F4 has quite calm background and delivers detailed warm powerful sound.
Now I think I really need 😀
After having relax time for my weak mustle for a week, and pumping up the passion again then
Has choky specially designed epoxy plates for still? If not, then
I fully agree with you, I am enjoying almost all kind of music with F4. The former driver EL34PP has noisy sound with complicated ochestra and white noise(background) also and very lean sound. I tried to improve it with solid state, but it became worse and worse. But your best recommended F4 showes me the different world with my Lowther. I notied that F4 has quite calm background and delivers detailed warm powerful sound.
Now I think I really need
😀 After having relax time for my weak mustle for a week, and pumping up the passion again then
Has choky specially designed epoxy plates for
still? If not, then
Re: It's right
it's certainly hard as takin' frog to water .......
you can find that only if you mail him
Malotron said:............. I bet he could get ZenMod to drink a glass of Zlatorog
-Mal
it's certainly hard as takin' frog to water .......
jkchoi said:
............
Has choky specially designed epoxy plates for
you can find that only if you mail him
to obtain a right to email
Still the log box tell me that I have to write post more in order to email direct to him.
So, I had to describe my need to him, before long he will be received email.😉
Still the log box tell me that I have to write post more in order to email direct to him.
So, I had to describe my need to him, before long he will be received email.😉
Re: to obtain a right to email
whatever road you choose , it will take you to the Rome ........
you can always reach choky at >choky@neobee.net<
copy and paste that between the >< brackets
jkchoi said:
whatever road you choose , it will take you to the Rome ........
you can always reach choky at >choky@neobee.net<
copy and paste that between the >< brackets
lykkedk said:
Your'e phonenumber is missing master sixpack ZenMod 😀 😀 😀
Jesper.
I don't follow ya there ...........
don't ya think that South Korea - Serbia phone call isn't somewhat expensive ....... ?
Wow
Wow !!!!
Now I can send email to you. I send a bomb to you pls carefully.... 😀 😀
I dont think it is quite expensive, maybe around 1U$/minute?
If you deny to receive continuously, then it can be possible, but your #is seems to be top secret.......
Wow !!!!
Now I can send email to you. I send a bomb to you pls carefully.... 😀 😀
I dont think it is quite expensive, maybe around 1U$/minute?
If you deny to receive continuously, then it can be possible, but your #is seems to be top secret.......
rail voltage
I have a xformer having two 0-30V AC .
I think the shunt regulator also has a important roll for the qualified sound. So, I do not want to replace it to the simple one having higher output voltage although the shunt has a big voltage drop and the voltage swing needed for F4 will be around +-20V.
But I understand that the sound quality can change by the rail V.
Choky what is your recommendation New Xformer or Change V?
In fact my F4 has 15V AC xformer. So, the rail voltage is around 18V during running. But having great sound quality. It has powerful enough. I would like to make a balaced F4 later to see what happens.
So, at this moment I want to challenge to down the rail voltage of pumpkin pre and shunt regulator also.
Let's see...........
24V can be adequate as output of shunt, so called for rail.
Too long later🙂 🙂
I have a xformer having two 0-30V AC .
I think the shunt regulator also has a important roll for the qualified sound. So, I do not want to replace it to the simple one having higher output voltage although the shunt has a big voltage drop and the voltage swing needed for F4 will be around +-20V.
But I understand that the sound quality can change by the rail V.
Choky what is your recommendation New Xformer or Change V?
In fact my F4 has 15V AC xformer. So, the rail voltage is around 18V during running. But having great sound quality. It has powerful enough. I would like to make a balaced F4 later to see what happens.
So, at this moment I want to challenge to down the rail voltage of pumpkin pre and shunt regulator also.
Let's see...........
24V can be adequate as output of shunt, so called for rail.
Too long later🙂 🙂