Case Production Soon to Start !!
So here is finally another update from me about the case parts.
Terribly sorry for delays. Everyone is extremely busy right now (with work), especially Mark.
1) We confirm once again price as promised before, e.g. Option 2 360 Euros per set.
2) 2x regulator heatsinks (also useful for rectifiers and CRC if you don't use regulators) add 20 Euros.
3) Bulk shipment 11 cases to Europe or USA 600 Euros, so 55 Euros per case.
(Estimate from forwarder only. Exact cost only after shipment due to Customs charges, etc. Forwarder is a trusted business partner.)
3a) 3 Asian subscribers will get shipped directly from HK, per DHL 85 Euros per case, or HK Post Office Parcel at cost. You can choose.
http://www.hongkongpost.com/eng/postage/overseas/parcel/surface/index.htm
Estimated weight 8kg.
4) Scheduled production begin July 2011, scheduled production end September 2011.
5) We would like to ask for down payment upfront 50% of (case+heatsink) cost per (ONE) bank transfer from GB leader (John McLean).
The other costs, such as local shipment, import tax, etc. can be paid together with the second payment when the case are ready to ship, or whatever arrangement you agree amongst yourselves.
Hope arrangement is agreeable to all.
Best,
Patrick
So here is finally another update from me about the case parts.
Terribly sorry for delays. Everyone is extremely busy right now (with work), especially Mark.
1) We confirm once again price as promised before, e.g. Option 2 360 Euros per set.
2) 2x regulator heatsinks (also useful for rectifiers and CRC if you don't use regulators) add 20 Euros.
3) Bulk shipment 11 cases to Europe or USA 600 Euros, so 55 Euros per case.
(Estimate from forwarder only. Exact cost only after shipment due to Customs charges, etc. Forwarder is a trusted business partner.)
3a) 3 Asian subscribers will get shipped directly from HK, per DHL 85 Euros per case, or HK Post Office Parcel at cost. You can choose.
http://www.hongkongpost.com/eng/postage/overseas/parcel/surface/index.htm
Estimated weight 8kg.
4) Scheduled production begin July 2011, scheduled production end September 2011.
5) We would like to ask for down payment upfront 50% of (case+heatsink) cost per (ONE) bank transfer from GB leader (John McLean).
The other costs, such as local shipment, import tax, etc. can be paid together with the second payment when the case are ready to ship, or whatever arrangement you agree amongst yourselves.
Hope arrangement is agreeable to all.
Best,
Patrick
Last edited:
Before we go into production, I need confirmation for the rear panel configuration.
For those who have voted, majority prefers IEC.
The one proposed by Horio will not fit, the one by smyslow will (just).
https://spreadsheets.google.com/spr...HYxdXZaY0pmaGJRUHk1bi1SdzdDOXc&hl=en_US#gid=0
Please see screen shots above.
If I do not hear objections, then it will be IEC as proposed by Uwe (post #278, 280).
Deadline in a week (21 June), so that we can still change drawings in time for production.
Patrick
.
For those who have voted, majority prefers IEC.
The one proposed by Horio will not fit, the one by smyslow will (just).
https://spreadsheets.google.com/spr...HYxdXZaY0pmaGJRUHk1bi1SdzdDOXc&hl=en_US#gid=0
Please see screen shots above.
If I do not hear objections, then it will be IEC as proposed by Uwe (post #278, 280).
Deadline in a week (21 June), so that we can still change drawings in time for production.
Patrick
.
Last edited:
Guys,
I’ll do a spreadsheet tonight for the case and heat sink regulators 50% payment.
Please don’t make any payments till I sort this.
Cheers
John
I’ll do a spreadsheet tonight for the case and heat sink regulators 50% payment.
Please don’t make any payments till I sort this.
Cheers
John
Boy am I envious
Ok - I will stop it now and concentrate on getting you 0.05% PRP's to go with this beautiful build!

Ok - I will stop it now and concentrate on getting you 0.05% PRP's to go with this beautiful build!
Thanks Arizala, payment received.
Davide please see spreadsheet with your price adjustment.
Money sent.
Thanks,
Davide
Here is a spreadsheet for case and regulator heat sinks;
https://spreadsheets.google.com/spr...oWSGm7zf1oI7Zpdvx7pzEw&authkey=CIT5trAJ#gid=0
All costs are in Euro, my account is: johnwilliammclean@bigpond.com
Please let me know if you don’t want the regulator heatsink’s and I’ll deduct the cost and adjust the spreadsheet accordingly.
Cheers
John
https://spreadsheets.google.com/spr...oWSGm7zf1oI7Zpdvx7pzEw&authkey=CIT5trAJ#gid=0
All costs are in Euro, my account is: johnwilliammclean@bigpond.com
Please let me know if you don’t want the regulator heatsink’s and I’ll deduct the cost and adjust the spreadsheet accordingly.
Cheers
John
Hi John,
I've just sent you the requested amount for F5X case & sinks.
Thanks again for all your efforts.
I've just sent you the requested amount for F5X case & sinks.
Thanks again for all your efforts.
Last edited:
Before we go into production, I need confirmation for the rear panel configuration.
For those who have voted, majority prefers IEC.
The one proposed by Horio will not fit, the one by smyslow will (just).
https://spreadsheets.google.com/spr...HYxdXZaY0pmaGJRUHk1bi1SdzdDOXc&hl=en_US#gid=0
Please see screen shots above.
If I do not hear objections, then it will be IEC as proposed by Uwe (post #278, 280).
Deadline in a week (21 June), so that we can still change drawings in time for production.
Patrick
.
The IEC proposed by Uwe looks great to me!
If I do not hear objections, then it will be IEC as proposed by Uwe (post #278, 280).
Deadline in a week (21 June), so that we can still change drawings in time for production.
Tomorrow I will try to order a sample of the proposed IEC to check the quality and if the wiring is still possible within the 10mm. Typically the parts from Farnell arrive one day later, so I will be able to give feedback and post some pics before 21st of June.
Uwe
Hey John,
I just sent over payment for (2) cases and (2) sets of Conrad heatsinks. That one hurt a bit... =)
Thank you sir!
I just sent over payment for (2) cases and (2) sets of Conrad heatsinks. That one hurt a bit... =)
Thank you sir!
Last edited:
- Status
- Not open for further replies.
- Home
- Group Buys
- Potential EUVL F5X designed case user distribution check