dumb question...
That was dumb question - Here's another...
If I have 260v @ 200ma going into my PSU board what value C1 should I use to keep my B+ @ 260v.
That was dumb question - Here's another...
If I have 260v @ 200ma going into my PSU board what value C1 should I use to keep my B+ @ 260v.
No such thing as a dumb question in my book. The best would be to simulate your preamp in PSUD.If I have 260v @ 200ma going into my PSU board what value C1 should I use to keep my B+ @ 260v
What tubes are you using in your aikido and what cathode resistors have you chosen...what is the voltage across your cathode resistors?
First I plan to try 6SL7s in / 6AS7s out.
What is a reasonable cathode resistor to use to give me lots of gain?
What is a reasonable cathode resistor to use to give me lots of gain?
Quote:
First I plan to try 6SL7s in / 6AS7s out.
What is a reasonable cathode resistor to use to give me lots of gain?
I thought I was a gain freak. The 6SL7's will be way too much gain. The 6SN7/6SN7 Aikidio I built has more than enough gain for anybody.
First I plan to try 6SL7s in / 6AS7s out.
What is a reasonable cathode resistor to use to give me lots of gain?
I thought I was a gain freak. The 6SL7's will be way too much gain. The 6SN7/6SN7 Aikidio I built has more than enough gain for anybody.
quote:
Maybe mine will come soon.
I'm sorry Joe. I ran out of octal boards. The new batch of octals were shipped to me yesterday.
If you have not received an email that they have been shipped. They have not been shipped.
Regards and apologies,
Bas
Bas,
Did the boards arrive yet?
Maybe mine will come soon.
I'm sorry Joe. I ran out of octal boards. The new batch of octals were shipped to me yesterday.
If you have not received an email that they have been shipped. They have not been shipped.
Regards and apologies,
Bas
Bas,
Did the boards arrive yet?
Not yet...any day now. I will post here as soon as they have arrived.Did the boards arrive yet?
Quote:
First I plan to try 6SL7s in / 6AS7s out.
What is a reasonable cathode resistor to use to give me lots of gain?
I thought I was a gain freak. The 6SL7's will be way too much gain. The 6SN7/6SN7 Aikidio I built has more than enough gain for anybody.
Burnt,
When you say, "...way too much gain" - do you think enough gain for a phono stage?
First I plan to try 6SL7s in / 6AS7s out.
What is a reasonable cathode resistor to use to give me lots of gain?
I thought I was a gain freak. The 6SL7's will be way too much gain. The 6SN7/6SN7 Aikidio I built has more than enough gain for anybody.
Burnt,
When you say, "...way too much gain" - do you think enough gain for a phono stage?
Octal boards.
Hello Bas.Please forgive me for my absence but I've been working working away and haven't had time to check the forum.I haven't received any emails as I normally do so I wrongly assumed there had been no activity.I see tonight that there has been quite a few posts since I last talked to you. I did ask for two octal boards and two power supply boards.If they've been sold then that's my bad luck for not making more effort, but if you have them can I pay you please?
Regards, Simon.
Hello Bas.Please forgive me for my absence but I've been working working away and haven't had time to check the forum.I haven't received any emails as I normally do so I wrongly assumed there had been no activity.I see tonight that there has been quite a few posts since I last talked to you. I did ask for two octal boards and two power supply boards.If they've been sold then that's my bad luck for not making more effort, but if you have them can I pay you please?
Regards, Simon.
The postman left a not saying I could pick them up tomorrow.Did the boards arrive yet?
since you are talking about postmen....
... did the postman already deliver to you the packet I sent?
Cheers
Andrea
... did the postman already deliver to you the packet I sent?
Cheers
Andrea
Hi Andrea,
Yes...thank you...I have forgotten a couple of times now to tell you this..
I have not gotten the sockets you wanted though..the shop had still not ordered. But they assured me it would be there next this coming weekend.
Regards,
Bas
Yes...thank you...I have forgotten a couple of times now to tell you this..
I have not gotten the sockets you wanted though..the shop had still not ordered. But they assured me it would be there next this coming weekend.
Regards,
Bas
Octal boards.
Hi Bas. Thanks for the reply. Can you tell me how much in pounds Sterling I owe you for two octal boards, two power supply boards and shipping please to the UK and I'll send via paypal straight away.
Many thanks, Simon.
Hi Bas. Thanks for the reply. Can you tell me how much in pounds Sterling I owe you for two octal boards, two power supply boards and shipping please to the UK and I'll send via paypal straight away.
Many thanks, Simon.
Hallo Simon,
psu board is 9 us dollars a piece
aikido board is 9.50 us dollars a piece
shipping for 4 boards is 3 usd
Total 40 USD
It's just as easy as paying sterling if you have paypal account to pay us dollars.
Regards,
Bas
psu board is 9 us dollars a piece
aikido board is 9.50 us dollars a piece
shipping for 4 boards is 3 usd
Total 40 USD
It's just as easy as paying sterling if you have paypal account to pay us dollars.
Regards,
Bas
Octal and PSU boards.
Hi there Bas. I've not had much luck just lately and just to make matters worse my PC gave up just after my last post to you.My hard drive had packed in and refused to restart.So I've bought another tower today and we're up and running again and hopefully you will have received a payment from me via paypal. I'm very grateful to you for your patience. Regards, Si.
PS.This is a warning to everyone.Back up your PC every once in a while or you may lose some important files.I'll be doing mine regularly from now on!
Hi there Bas. I've not had much luck just lately and just to make matters worse my PC gave up just after my last post to you.My hard drive had packed in and refused to restart.So I've bought another tower today and we're up and running again and hopefully you will have received a payment from me via paypal. I'm very grateful to you for your patience. Regards, Si.
PS.This is a warning to everyone.Back up your PC every once in a while or you may lose some important files.I'll be doing mine regularly from now on!
Aikido
Hello every one.
This my firt post.
So, my name is Naphtali, and I'm located in Spain.
Interestig project this Aikido one and intereting this iniciative of yours.
May I drop in? If yes, let me know wich ones are the first steps.
Kind regards.
Nafty😎
Hello every one.
This my firt post.
So, my name is Naphtali, and I'm located in Spain.
Interestig project this Aikido one and intereting this iniciative of yours.
May I drop in? If yes, let me know wich ones are the first steps.
Kind regards.
Nafty😎
- Home
- Amplifiers
- Tubes / Valves
- Poll..anyone interested in an Aikido linestage PCB group buy?