Dumb Dutchie - it seems all that weed , combined with mileage , is taking it's toll , for both of us
didn't I tell ya that everything is already in da bloody thread : http://www.diyaudio.com/forums/pass-labs/199308-pass-labs-xs-2.html#post3327601
who needs more ?
replace Milky Way (modulated?) cascodes with resistors , and whoila! - you're having Poor Dutchie XS , for scorching your Quad Blinds
Call me ducky, 112 output devices doesn't necessarily imply a 112-device output stage (to a farmer hick, surrounded by illegal weed plantations)
It's for a mind recalibration, not ripping IP. If I want a twin-tower, I just buy it.
what if we are picky , so we can tell that SE burden is part of OS ?
and remember that Pa is having plenty of them ....... there were times when few resistor can be called the same , but now was time for Demonstration of Force
when using parts from Tobbacco Store , logic is certainly different from case of Buying Snob Shunty , with 7 legged Toshiba in LTP
and remember that Pa is having plenty of them ....... there were times when few resistor can be called the same , but now was time for Demonstration of Force
when using parts from Tobbacco Store , logic is certainly different from case of Buying Snob Shunty , with 7 legged Toshiba in LTP
Depends which illegal "green" house got raided.
ZMocker, can you explain the cable ridle to me.
Last edited:
what's wrong with :
-2 wires +
-2 wires -
-2 wires GND
-2 wires SE Gallows
?
(be silent , they'll gonna make it that way , now
)jacco vermeulen. Eight poles for a maximum of eight individual wires.
- a + Vcc rail
- a -Vcc rail
- a common power rail to go with the above 2
- two current source [load] rails
- Three conductors TBD
- The bottom box shows a 3 conductor AC power male socket.The Xs literature talked about bigger and quieter transformers and "a bank of soft recovery diodes".
- Anothe cable connects this box to the one atop it.
- On the left side just under the handle of the top box may be an independent earth ground for this chassis.
- Four speaker outputs; 2 black and two red. Speculation about the topology of the output stage{s} is welcome.
- Maybe two RCA-style connectors under the right handle.
- A multi-hole socket at the ~top center
- And the Speakon.
Last edited:
Signal Ground.
My problem is with the 2 wires SE.
They go into High Ganja impedance (you know : MOSFET gates. Regardless of a bank of 3W Panasonic resistors in parallel, to side-rail the output)
Those +/- rail conductors carry large bags of current weeds, just think how high the charging peaks to the penthouse cans could reach.
And all those run side-by-side over a 5ft length, inside 0.8" diameter cable.
That's some fancy cable, please name me one that'll do the trick.
(btw, the Speakon only comes in 2, 4, and 8-pole. Using an 8-pole not necessarily means 8 conductors)
Attachments
Last edited:
you're too old for ...... and too young to die ......... so why you should be so puzzled with welder ?
these 8 contacts can be shared for 4 conductors , and these you have plenty of types , even skinned as preputium graded snake
so , what's the fuss - PL guys already revealed where the Troops are , how many dust biters and how many horsemans
what probably will stay undisclosed is what's on now nice and small Greenfield , contrary to Stadium sized proto specimen
so - even if one is Schwarzie enough to put up for two TIG cases (with or without oxygene bottles ) , there is still question mark about wire feeding brain
these 8 contacts can be shared for 4 conductors , and these you have plenty of types , even skinned as preputium graded snake
so , what's the fuss - PL guys already revealed where the Troops are , how many dust biters and how many horsemans
what probably will stay undisclosed is what's on now nice and small Greenfield , contrary to Stadium sized proto specimen
so - even if one is Schwarzie enough to put up for two TIG cases (with or without oxygene bottles ) , there is still question mark about wire feeding brain
you remember that I told ya that Pa deliberately didn't allowed me near his Ark ?
so - fact is simple - Pa found last year ( in Ark, where else ) big stash of various valued glue-on thingies , so now he must find a way to use them all
Thank you jacco vermeulen for the close-up picture of the signal ground and negative ground labels. Unfortunately, I am disconnected from your question re F5. Dunno the answer.
Most important is that the Xs amp system works safely [first] and performs beautifully. I wonder if there is an answer in a twisted pair of conductors carrying in and out of phase large or small currents to address your earlier questions.
I do not have a clear mental of the "circuit" above. A reference to a published schematic by Mr. Pass will help.
Maybe because my flavor ranges from operation mode to cable code, from manufacturing to logistics, and from cost calculation to modular/standardising percentages.
Not just how to actively/passively force the steering wheel to the right on a tilting road (or electronically make front wheels communicate).
Likely why Pa(jammy) tale-chasing hasn't turned yawning yet, 28 years coming august.
(audio is also a better stimulant than sniffing coke during wuthering lows, saves plenty mulla on couch bills)
Ganja candy spit in the 150 =>
Attachments
Last edited:
- Status
- Not open for further replies.