• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Official GB for DSD DAC Signalyst DSCv2

Jump to Latest
#143
Mark, when your DSC will be ready (~ in 2-3 weeks), I'll PM you with payment instructions and ask shipping address.
The payment should be done at paypal account, after that we'll ship your order in a 2-3 working day.

By default DSC isn't fully soldered to give you opportunity for using different build options (see User Guide).
DSC252.JPG - Google Drive

For 2.6.2 unsoldered - RCA/XLR, transformers, Amanero input connector, jumpers on PCB (XLR/RCA choice).

If you want fully soldered board just write it. It's free of charge.
 
Last edited:
#146
Vit123 said:
Mark, when your DSC will be ready (~ in 2-3 weeks), I'll PM you with payment instructions and ask shipping address.
The payment should be done at paypal account, after that we'll ship your order in a 2-3 working day.

By default DSC isn't fully soldered to give you opportunity for using different build options (see User Guide).
DSC252.JPG - Google Drive

For 2.6.2 unsoldered - RCA/XLR, transformers, Amanero input connector, jumpers on PCB (XLR/RCA choice).

If you want fully soldered board just write it. It's free of charge.
Click to expand...

Perfect! I can solder it myself, absolutely no problem. Thanks.
 
#147
HI Vit,
I have a couple questions.
1) Does the board support for AC power 6-7V ac directly connect or need to retified
it to DC first then connect.
2) How to do with 3 Pin Mute per page 5 in user guide mentioned. Connect all 3 Pins to ground?
3) transformer has 2 pins at one side and other side has 3 pins. Which position to be installed on the board ?

thank you
Benkit
 
#150
benkit said:
HI Vit,
Does the board support for AC power 6-7V ac directly connect or need to retified it to DC first then connect.
Click to expand...
Only DC voltage (rectified or external power supply). AC voltage can damage internal LDO.

benkit said:
2) How to do with 3 Pin Mute per page 5 in user guide mentioned. Connect all 3 Pins to ground?
Click to expand...
You need wire MUTE pin from Amanero to DSC PIN 11 (Mute input, near pin 1), not Ground. Have a look at DSC digital input pinout in User Guide (page 4).
It needs to be done only when placing Amanero as Option 3 from User Guide.

benkit said:
3) transformer has 2 pins at one side and other side has 3 pins. Which position to be installed on the board ?
Click to expand...
Usually 2 wires are input side. 3 wires are output side (+V 0 -V). Connect +V, 0 or +V, -V to rectifier (depends on output voltage you need).

Pls give me a link to your transformes or place a photo - I can give additional info.
 

Attachments

  • PIN11.png
    PIN11.png
    106.9 KB · Views: 518
#160
I've found a few Amanero cards on Amazon or Aliexpress, plus the official Amanero web site.

What are your recommendations?

Here's what I found:

On Amazon
Amanero Usb iis Digital Interface with the Program Support dsd512,32b 384K Amplifier Board: Amazon.ca: Musical Instruments, Stage & Studio

This one with Femto clock (I have my doubts on the genuine Crystek...)
New ! Femtosecond Version Combo384 USB to I2S Digital Interface Refer to Amanero USB Card / I2S output for ES9018 ES9028PRO DAC -in Amplifier from Consumer Electronics on Aliexpress.com | Alibaba Group

This one is a normal version but 5 stars and 88+ reviews
Aiyima ATSAM3U1C XC2C64A Amanero USB IIS Digital Interface DAC Decoder Board Support DSD512 32bit 384K I2S DSD Output-in Amplifier from Consumer Electronics on Aliexpress.com | Alibaba Group

Thanks
Do
 
You must log in or register to reply here.
Top Bottom