@BlueFusion:
I am coordinating the parts GB for everybody in Europe.
If you would like me to order the pots and forward them to you, I could do that.
Right now it looks like I'll be ordering from Mouser and Farnell, but I could add RS...
I am coordinating the parts GB for everybody in Europe.
If you would like me to order the pots and forward them to you, I could do that.
Right now it looks like I'll be ordering from Mouser and Farnell, but I could add RS...
Cheers - but doesn't look like it will be necessary. I'm taking RocketScientist's advice and going with the 15mm equivalent pot from Mouser - meaning I can get every item from Mouser bar the case from Farnell.@BlueFusion:
I am coordinating the parts GB for everybody in Europe.
If you would like me to order the pots and forward them to you, I could do that.
Right now it looks like I'll be ordering from Mouser and Farnell, but I could add RS...
Thanks though 🙂
Okey doke, I have updated the online spreadsheet (first link in my sig). If there is anything wrong or you want me to double check then please email me or PM me to let me know.
If anyone has any questions (perhaps ones that I have missed and forgotten about) then again, drop me an email or pop me a PM.
Cheers
If anyone has any questions (perhaps ones that I have missed and forgotten about) then again, drop me an email or pop me a PM.
Cheers
If you could up my order to 10 PCBs that would be great.
Just send me a message how much money you need, I'll transfer right away.
Thanks again for your effort.
Just send me a message how much money you need, I'll transfer right away.
Thanks again for your effort.
I'm still hopeful for having the boards shipped before October - it depends on how long PayPal ignore me though.
Jokener: okey doke I'll send you a PM in a minute.
Latest PCB prototype
As we all know the PCB has recently been modified a bit and these have not yet been prototyped. Given the vast size of this order it would be nice, for peace of mind, if we could prototype it. PayPal are delaying things anyway so time is somewhat freely available.
RocketScientist has been looking at proto services but it looks like it will come in at about $120 - a not inconsiderable sum of money that he would understandably rather not have to pay (his financial contributions to this project are already beyond 'beer money', not to mention his time input).
I'm rambling but at the moment he is researching a promotional deal which may turn out to be much better value. He'll be keeping me updated on that.
So the point is, if anyone knows of/has access to cheap and quick prototype board manufacturers then please let one of us know.
Jokener: okey doke I'll send you a PM in a minute.
Latest PCB prototype
As we all know the PCB has recently been modified a bit and these have not yet been prototyped. Given the vast size of this order it would be nice, for peace of mind, if we could prototype it. PayPal are delaying things anyway so time is somewhat freely available.
RocketScientist has been looking at proto services but it looks like it will come in at about $120 - a not inconsiderable sum of money that he would understandably rather not have to pay (his financial contributions to this project are already beyond 'beer money', not to mention his time input).
I'm rambling but at the moment he is researching a promotional deal which may turn out to be much better value. He'll be keeping me updated on that.
So the point is, if anyone knows of/has access to cheap and quick prototype board manufacturers then please let one of us know.
I know of Silver Circuits at PCB Prototypes but that's about it for that tricky combination of cheap AND fast. And they aren't that cheap. Other than that, perhaps our fab house would be willing to produce a prototype board considering the volume of the run that's being produced? This seems like an option worth investigation.
Also - I've preemptively contacted paypal to ask if there's anything I can do to avoid falling foul of their buyer protection myself. I'll let you know if/when I get a reply!
Also - I've preemptively contacted paypal to ask if there's anything I can do to avoid falling foul of their buyer protection myself. I'll let you know if/when I get a reply!
Last edited:
If there is no promotional deal to be made for the prototype, I'd chip in with a 5'er.
If everybody gives only a little bit, a 120$ problem goes away very quickly!
If everybody gives only a little bit, a 120$ problem goes away very quickly!
If there is no promotional deal to be made for the prototype, I'd chip in with a 5'er.
If everybody gives only a little bit, a 120$ problem goes away very quickly!
I would be willing to help chip in as well. especially since I was expecting to pay something along the line of $10 per board at the beginning, and were way below that now.
If there is no promotional deal to be made for the prototype, I'd chip in with a 5'er.
If everybody gives only a little bit, a 120$ problem goes away very quickly!
I'm more than happy to donate
Hi are you still taking orders?
If so please include 2 for me. Thanks!
I can send payment if my order can be taken.
If so please include 2 for me. Thanks!
I can send payment if my order can be taken.
Hi again
I have talked to Jokener and please send my two boards directly to him.
Please send the excess money i paid for shipment to the new prototypes or put them to another use of your choice.
I have talked to Jokener and please send my two boards directly to him.
Please send the excess money i paid for shipment to the new prototypes or put them to another use of your choice.
RocketScientist has been looking at proto services but it looks like it will come in at about $120 - a not inconsiderable sum of money that he would understandably rather not have to pay .
What about Olimex ? They do one double side board for about Eur 30 + shipping.
Their boards are 160x100mm so two O2 boards can be made from one (they also panelize/depanelize for free).
Last edited:
...
Latest PCB prototype
As we all know the PCB has recently been modified a bit and these have not yet been prototyped. Given the vast size of this order it would be nice, for peace of mind, if we could prototype it. PayPal are delaying things anyway so time is somewhat freely available.
RocketScientist has been looking at proto services but it looks like it will come in at about $120 - a not inconsiderable sum of money that he would understandably rather not have to pay (his financial contributions to this project are already beyond 'beer money', not to mention his time input).
... if anyone knows of/has access to cheap and quick prototype board manufacturers then please let one of us know.
Earlier I thought I read you will be ordering the PCBs from Seeed. You could order 10 first for $25
If there is no promotional deal to be made for the prototype, I'd chip in with a 5'er.
If everybody gives only a little bit, a 120$ problem goes away very quickly!
I'd also be happy to donate.
Thanks for all the suggestions. This isn't an easy thing. The problem with all the cheap services I know of is they (or at least the actual board houses) are in China. They typically quote 5 - 10 business days, then you have international shipping, customs, etc. By the time you get the boards it's usually 2 - 3 calendar weeks.Earlier I thought I read you will be ordering the PCBs from Seeed. You could order 10 first for $25
Then a board needs to be built and tested. And I'm the one in the best position (with an audio analyzer) to do proper testing. Then there's the leadtime for the production boards--another 2+ weeks. It all adds up to 1 - 2 months. That's a long time to ask everyone to wait after they've already paid their money.
I'm currently working on a USA solution and will update everyone soon.
- Status
- Not open for further replies.
- Home
- Group Buys
- O2 Headphone Amplifier GB