I see that there are 5 1uF film caps on the output of ZM D1. Is there any reason behind that? Can I use a single film cap, and what is the recommended range that can be used?
use value and number of these by your liking
as I said - I fancy 1uF MKC
you use what's attractive to you, starting from 220nF and up
for elco, Silmic is no brainer
as I said - I fancy 1uF MKC
you use what's attractive to you, starting from 220nF and up
for elco, Silmic is no brainer
I just noted that my dac has AD1862s mounted on socket: I think I'll also try that board 🙂the AD chip is easy to find ?
Last edited:
Cannot find 15mm MKCs...
I could edit pcbs to accommodate smaller pitch, but you didn't ask 🙂
drill holes, use wire underneath, no biggie
risk of being fakes , polycarbonate with LS 15mm
:
https://www.aliexpress.com/item/1005003769715510.html?spm=a2g0o.productlist.0.0.2e5410353Ijau3&algo_pvid=35920d90-d1b3-46ae-a1f1-232feacf945c&algo_exp_id=35920d90-d1b3-46ae-a1f1-232feacf945c-15&pdp_ext_f={"sku_id":"12000027105399521"}&pdp_npi=2@dis!SGD!13.6!13.6!!!1.63!!@210318cb16643738031086185eda22!12000027105399521!sea&curPageLogUid=PROFlvzIgwkb
:
https://www.aliexpress.com/item/1005003769715510.html?spm=a2g0o.productlist.0.0.2e5410353Ijau3&algo_pvid=35920d90-d1b3-46ae-a1f1-232feacf945c&algo_exp_id=35920d90-d1b3-46ae-a1f1-232feacf945c-15&pdp_ext_f={"sku_id":"12000027105399521"}&pdp_npi=2@dis!SGD!13.6!13.6!!!1.63!!@210318cb16643738031086185eda22!12000027105399521!sea&curPageLogUid=PROFlvzIgwkb
You have a PM, thanks!Please send me a PM with your details.
Russellc
If you like polycarbonate, I can recommend these: https://www.ebay.com/itm/372808547674Cannot find 15mm MKCs...
Would also be interested in boards for this project, thanks!Unfortunately he is now sold out and won't be ordering more. However, I just ordered 11 from Rochester Electronics (same distributor that Paddy used). I paid about $25 each and will sell them for the same $25 plus actual shipping. Also I have ordered Miro's PCB using his gerbers. I will have a couple extra if anyone wants a set. Drop me a PM if interested.
Cheers.
Russellc
- Home
- Amplifiers
- Pass Labs
- NOS TDA1541 + D1 I/V & output stage