I see that there are 5 1uF film caps on the output of ZM D1. Is there any reason behind that? Can I use a single film cap, and what is the recommended range that can be used?
use value and number of these by your liking
as I said - I fancy 1uF MKC
you use what's attractive to you, starting from 220nF and up
for elco, Silmic is no brainer
as I said - I fancy 1uF MKC
you use what's attractive to you, starting from 220nF and up
for elco, Silmic is no brainer
I just noted that my dac has AD1862s mounted on socket: I think I'll also try that board 🙂
Last edited:
I could edit pcbs to accommodate smaller pitch, but you didn't ask 🙂
drill holes, use wire underneath, no biggie
risk of being fakes , polycarbonate with LS 15mm
:
https://www.aliexpress.com/item/1005003769715510.html?spm=a2g0o.productlist.0.0.2e5410353Ijau3&algo_pvid=35920d90-d1b3-46ae-a1f1-232feacf945c&algo_exp_id=35920d90-d1b3-46ae-a1f1-232feacf945c-15&pdp_ext_f={"sku_id":"12000027105399521"}&pdp_npi=2@dis!SGD!13.6!13.6!!!1.63!!@210318cb16643738031086185eda22!12000027105399521!sea&curPageLogUid=PROFlvzIgwkb
:
https://www.aliexpress.com/item/1005003769715510.html?spm=a2g0o.productlist.0.0.2e5410353Ijau3&algo_pvid=35920d90-d1b3-46ae-a1f1-232feacf945c&algo_exp_id=35920d90-d1b3-46ae-a1f1-232feacf945c-15&pdp_ext_f={"sku_id":"12000027105399521"}&pdp_npi=2@dis!SGD!13.6!13.6!!!1.63!!@210318cb16643738031086185eda22!12000027105399521!sea&curPageLogUid=PROFlvzIgwkb
