The measurement of resistors hasn't god value, I put only the inside the draw them.
Do you know how much is a Nippon-chemicon 18000uF/50V? Thanks.
Do you know how much is a Nippon-chemicon 18000uF/50V? Thanks.
IMHO, Britney is much kinder on the eyes than Hoary Harry.
I don't have enough data for a sonic evaluation though.
http://www.dictionary.com/search?q=hoary.
http://www.thesaurus.com/cgi-bin/search?config=roget&words=hoary.
Eric. 🙂
BTW - If Britney Spears married Gene Pitney, would she be called Britney Pitney ?. 😀
I don't have enough data for a sonic evaluation though.
http://www.dictionary.com/search?q=hoary.
http://www.thesaurus.com/cgi-bin/search?config=roget&words=hoary.
Eric. 🙂
BTW - If Britney Spears married Gene Pitney, would she be called Britney Pitney ?. 😀
More seriously, Thanks for all the replies of good results with the AKSA.
Bernard, I am interested to know of your results in time - good luck.
I am keen to know of this amps transient overload characteristics
because of my intended DJ/Live Active Line Array application.
Big bass, invigorating mids and sweet highs are goals.
I expect to built a common PSU/multi amp module per cabinet, so Hugh Deans strong comments of transformer regulation and capacitance values strongly affecting sonics is of concern.
Perhaps I require seperate rectifiers and caps per band ?
I will be requiring 3 or 4 amps per cabinet, times 12 cabinets, so economy, ease of construction, idle dissipation and reliability are mission critical, in addition to, of course sonics.
Thanks for any objective/subjective suggestions,
Eric.
Bernard, I am interested to know of your results in time - good luck.
I am keen to know of this amps transient overload characteristics
because of my intended DJ/Live Active Line Array application.
Big bass, invigorating mids and sweet highs are goals.
I expect to built a common PSU/multi amp module per cabinet, so Hugh Deans strong comments of transformer regulation and capacitance values strongly affecting sonics is of concern.
Perhaps I require seperate rectifiers and caps per band ?
I will be requiring 3 or 4 amps per cabinet, times 12 cabinets, so economy, ease of construction, idle dissipation and reliability are mission critical, in addition to, of course sonics.
Thanks for any objective/subjective suggestions,
Eric.
Re: Hoary
This is meant in the most respectful way possible, of course !. 🙂
Eric.
HarryHaller said:
This is meant in the most respectful way possible, of course !. 🙂
Eric.
Oldies
Speaking of oldie but goodies how about a JC-3 with Toshiba SC3281s, SA1302s, K389s,J109s. Any suggestions for the RCA 6180s and 6178s?
http://marklev.com/marklev/JC3/index.html
Speaking of oldie but goodies how about a JC-3 with Toshiba SC3281s, SA1302s, K389s,J109s. Any suggestions for the RCA 6180s and 6178s?
http://marklev.com/marklev/JC3/index.html
Attachments
Thanks Harry, This one is in my EW collection somewhere and I had forgotten it.
Any sonic experience of this one, anybody ?.
Eric.
is a concern, but this design looks quite easily to implement.
Any sonic experience of this one, anybody ?.
Eric.
Can any body write to Mr. Mccormack for a or the conceptual schematic ?
I have a old DNA1 coming in, but I wish to converted it into a mono-mono design....
Lhchen
- Status
- Not open for further replies.