Re: yippie
Hey Sunil.... thanks for the appreciation, buddy..!!! And hey... I won't really mind you downloading pics from my website if that's gonna do some good to you. And thanks for referring my website..!!! 🙂
runik4 said:
Hey Sunil.... thanks for the appreciation, buddy..!!! And hey... I won't really mind you downloading pics from my website if that's gonna do some good to you. And thanks for referring my website..!!! 🙂
Re: yippie
Hey Vijay.... if you are at Pune, why don't you try Lensel Optics?
Contact Add:
Lensel Optics Pvt. Ltd.,
66/2, D2, MIDC, Chinchwad,
Pune - 411 019
Tel : +91-20-66111722, 27464581, 27474340
Fax : +91-20-66111721
Email : lensel@vsnl.com or lensel@pn2.vsnl.net.in
P.S: Lensels are bad at email response. Try speaking to them instead.
vijaycool said:
Hey Vijay.... if you are at Pune, why don't you try Lensel Optics?
Contact Add:
Lensel Optics Pvt. Ltd.,
66/2, D2, MIDC, Chinchwad,
Pune - 411 019
Tel : +91-20-66111722, 27464581, 27474340
Fax : +91-20-66111721
Email : lensel@vsnl.com or lensel@pn2.vsnl.net.in
P.S: Lensels are bad at email response. Try speaking to them instead.
yeah i need a visit to lensel optic directly. i am planning for benq 15 inch lcd monitor just coz of the contrast ratio 450:1 and response time 12ms.
is anyone feeling blurring of the fast moving image in super or victor lcd.
is anyone feeling blurring of the fast moving image in super or victor lcd.
one more query
@maks0001: whom to contact in lensel optics.
are they having different groove pitch a.k.a 0.5 mm and 0.2 mm pitch
what is the native resolution for those victor or super lcd's coz they have put max 1024*728(but thats not the resolution for widescreen tv)
any help regarding that info appreciated
@maks0001: whom to contact in lensel optics.
are they having different groove pitch a.k.a 0.5 mm and 0.2 mm pitch
what is the native resolution for those victor or super lcd's coz they have put max 1024*728(but thats not the resolution for widescreen tv)
any help regarding that info appreciated
Re: one more query
Vijay, I'm not sure of the point in contact at Lensel... but man, when you are calling as a customer, you should be least bothered about all those things.
well, I did not chk the groove pitch factor when I ordered my Lens from Lensel... in fact, I didn't communicate with them... it was a fellow DIYer who helped me out.
vijaycool said:
Vijay, I'm not sure of the point in contact at Lensel... but man, when you are calling as a customer, you should be least bothered about all those things.
well, I did not chk the groove pitch factor when I ordered my Lens from Lensel... in fact, I didn't communicate with them... it was a fellow DIYer who helped me out.
Thanks, maks i will contact this week end. need to hunt for a suitable panel first with good response time
New projector from India !
Maks take a look at my 95% complete PJ i'm still waiting on my lense and i just bought a 220mm and a 330mm they should also be here very shortly the box turned out aok.And i fixed the light problem it was my reflector now i'm using a reflector from a huge flashlight,the image is very bright now. http://www.hostclip.com/dl/feb5a29faa739a7a2e1602daab97e260
Maks take a look at my 95% complete PJ i'm still waiting on my lense and i just bought a 220mm and a 330mm they should also be here very shortly the box turned out aok.And i fixed the light problem it was my reflector now i'm using a reflector from a huge flashlight,the image is very bright now. http://www.hostclip.com/dl/feb5a29faa739a7a2e1602daab97e260
Re: New projector from India !
Gr8 going, Cool_1
.... I know how it feels like a winner when you 
your head and root out the problem... 😀
please do keep us posted on the progress and results. 🙂
Gr8 going, Cool_1
.... I know how it feels like a winner when you your head and root out the problem... 😀 please do keep us posted on the progress and results. 🙂
Hi Maks,
Sorry, I am keeping quiet for a long time. My attempts at carpentry failed miserably!, and so now I have entrusted the work to a carpenter. Hopefully the shell will be ready by this weekend, and hope to see some result by Monday or Tuesday. I will post the results as soon as possible.
Pollok
Sorry, I am keeping quiet for a long time. My attempts at carpentry failed miserably!, and so now I have entrusted the work to a carpenter. Hopefully the shell will be ready by this weekend, and hope to see some result by Monday or Tuesday. I will post the results as soon as possible.
Pollok
Nice design!!
Pollok thats a nice looking design!!!! i like that especially the cooling part it looks high tech.
Pollok thats a nice looking design!!!! i like that especially the cooling part it looks high tech.
Thanks cool1. This is basically the same as Maks's design. I have modified the exterior a bit, with more ventilation.
pollok said:
Man... this is Fundoo..!!! Nice design, Pollok. 🙂
Just a small suggestion.... try to keep those air-vents only on the rear, or at the most on the lower front and rear. Vents all over may spoil the looks.... and if the carpenter does a shabby work, then it is screwed.
🙂
Thanks Maks. I am going to conceal the air vents in black lining, so that it won't look ugly. And also, the vents at the front top are angled towards the rear end and those at the bottom are facing down.
Anyway, these plans have to work. If the carpenter screws up, then I'll be back in square one.
- Pollok
Anyway, these plans have to work. If the carpenter screws up, then I'll be back in square one.
- Pollok
Gosh! It's happened again!! The carpenter brought back the plans and advance saying he could not do it!!! The measurements in cm and mm were too much for him, it seems. I think I'll have to settle for the normal box type PJ for now, and if and when I find a 'real' carpenter who can follow my plans, I will switch to the new one...
pollok said:
Pollok, that's how these carpenter guyz are. I had a similar experience when I had designed my Speaker columns, and I had a tough time explaining the design to my carpenter. He took over a week just to understand the push-pull type design. Anyways... my suggestion is, just pick that saw and hammer and get on to it yourself... that's what I did. It's no good relying on these duds. Moreover, when you do it all by yourself you get a satisfaction of creation, even if it's a simple design.... and your PJ can truely be called a DIY Pj.
New projector from India !
well guy's i'm not satisfied with the out come of my pj picture quality the image is very dim and i can't hardly see it from a throw distance of 12 feet SO i have decided to start another box this one will be 15"wide and 24" in length and 8"in depth just a basic design the bulb i will use is a 400watt metal halide color temp of 4200 i will try to post the bulb .Here is the bulbhttp://www.hostclip.com/dl/cfeb05c4c8a8e8d9635636005c6f4385
well guy's i'm not satisfied with the out come of my pj picture quality the image is very dim and i can't hardly see it from a throw distance of 12 feet SO i have decided to start another box this one will be 15"wide and 24" in length and 8"in depth just a basic design the bulb i will use is a 400watt metal halide color temp of 4200 i will try to post the bulb .Here is the bulbhttp://www.hostclip.com/dl/cfeb05c4c8a8e8d9635636005c6f4385
Re: New projector from India !
Hey, cool_1... was just wondering what's deterring the brightness level, and how can a different design box enhance it. Mine too is 12 ft throw distance, but the image is bright enough at 150W MH bulb. Have you tried adjusting the brightness / contrast levels on the LCD?
cool 1 said:
Hey, cool_1... was just wondering what's deterring the brightness level, and how can a different design box enhance it. Mine too is 12 ft throw distance, but the image is bright enough at 150W MH bulb. Have you tried adjusting the brightness / contrast levels on the LCD?
New projector from India !
Maks I have tried to adjust the brightness and the contrast but it just won't get any brighter.I also tried to move the condenser lense closer and farther away from the bulb,no difference .Remember that i'm using an old slide projector 500w bulb it gives off alot of heat but little light.The condenser brightens the light that i have but still not enough.Also if i take and remove the condenser the image is not even visible,so the condenser does help alot. Everything inside the box is enclosed absolutely no light loss at all.Remember in an earlier post the center of the image was very bright so i used a diffuser from the back of the LCD to even out the light.If i remove the diffuser the center of the image is acceptable however the outside is dull and not acceptable. The new light engine will be for sure a big hit.This bulb is huge 11.5"long BT 37 MH 400w kelvin 4200 this bulb will work for sure.Therefore a bigger box is needed.
Maks I have tried to adjust the brightness and the contrast but it just won't get any brighter.I also tried to move the condenser lense closer and farther away from the bulb,no difference .Remember that i'm using an old slide projector 500w bulb it gives off alot of heat but little light.The condenser brightens the light that i have but still not enough.Also if i take and remove the condenser the image is not even visible,so the condenser does help alot. Everything inside the box is enclosed absolutely no light loss at all.Remember in an earlier post the center of the image was very bright so i used a diffuser from the back of the LCD to even out the light.If i remove the diffuser the center of the image is acceptable however the outside is dull and not acceptable. The new light engine will be for sure a big hit.This bulb is huge 11.5"long BT 37 MH 400w kelvin 4200 this bulb will work for sure.Therefore a bigger box is needed.
Attachments
New projector from India !
Maks take a look at this as this is my new box built today the funny looking thing in the center is the LCD holder.This time 2 fans in the rear 120mm one to suck and one to blow.The one on the side will blow straight across to keep LCD cool.Not sure as to were i will put the balast yet as it also needs some cooling. http://www.hostclip.com/dl/770a6ca7b0cb380a254c531c5586aecd
Maks take a look at this as this is my new box built today the funny looking thing in the center is the LCD holder.This time 2 fans in the rear 120mm one to suck and one to blow.The one on the side will blow straight across to keep LCD cool.Not sure as to were i will put the balast yet as it also needs some cooling. http://www.hostclip.com/dl/770a6ca7b0cb380a254c531c5586aecd
- Status
- Not open for further replies.