C1 & C2
Questions:
1) Anybody know the value of C1 and C2 on the power supply board? Better yet, part numbers? The power supply parts list spreadsheet does not show C1 and C2.
2) Is it necessary to install C1 and C2 on the power supply board?
Attached is a picture of the power supply board. C1 and C2 is shown next to V- and V+.
Questions:
1) Anybody know the value of C1 and C2 on the power supply board? Better yet, part numbers? The power supply parts list spreadsheet does not show C1 and C2.
2) Is it necessary to install C1 and C2 on the power supply board?
Attached is a picture of the power supply board. C1 and C2 is shown next to V- and V+.
Attachments
Re: C1 & C2
C1&C2 are .001uF bypass caps, pretty much a standard value for this application. These are an optional part and can be installed at the users discretion.
BTW that looks like an old version of the board.
Regards
Anthony
fcel said:
C1&C2 are .001uF bypass caps, pretty much a standard value for this application. These are an optional part and can be installed at the users discretion.
BTW that looks like an old version of the board.
Regards
Anthony
I have 25 IRFP250 FETs left, I can only match some pairs maybe some sets of three.
$3US per FET Plus mailing fee (a few bucks)
Best application is Mini A's no matching required.
Regards
Anthony
$3US per FET Plus mailing fee (a few bucks)
Best application is Mini A's no matching required.
Regards
Anthony
No matching for IRF250 for mini-A but Q1 and Q2 (or is it Q3) still does require matching, right? I may want some matched Q1 and Q2 in the future.
Member
Joined 2002
Hi Coulomb...
Could you please drop me mail...
I am intertested for some matched mosfet for Aleph30 ( lets say 4xtree mached pair ( 2 chanel )
and couple of IRF9610 matched pair ( 6-10 pair if posibile )
Thanks
Regards
Josip
Could you please drop me mail...
I am intertested for some matched mosfet for Aleph30 ( lets say 4xtree mached pair ( 2 chanel )
and couple of IRF9610 matched pair ( 6-10 pair if posibile )
Thanks
Regards
Josip
Member
Joined 2002
Kit's UPDATE
All the kits are 75% done.. Just have to add a few resistors to the baggies and put the fet's into there baggies..
ALL the resistors are left on there TAPED lead. Some are cut into 7 (Mini A ) And A30's are in 24's per baggie witch fills 2 channels.
All the kits are 75% done.. Just have to add a few resistors to the baggies and put the fet's into there baggies..
ALL the resistors are left on there TAPED lead. Some are cut into 7 (Mini A ) And A30's are in 24's per baggie witch fills 2 channels.
Member
Joined 2002
Member
Joined 2002
joster said:
JOSTER!! you to email me.. Address please
Joster packed Yes Kits's a30 x2 Psu o Shipping Paid yes
just so people no it is not private i don't want you posting your address on the forum : O )
Member
Joined 2002
Member
Joined 2002
chipco3434 said:
Some small packages go out tomorrow.
Not all but about 10 or so. Then the next day more. If you have not emailed me yet please do so to confirm the correct Shipping address..
Hanzwillem
illusionxx
Joster
Chipco3434
Assesears
jeff mai
Mark Stones
Phoneisbusy
Member
Joined 2002
I would think that too. I have seen in the pas that people dont up date there paypal mailing address then i ship to the wrong person.
- Status
- Not open for further replies.