Hi Roberto,
I am very impressed with your workmanship. I'd be most interested in a copy of your project files. Could you send me a private message and I'll let you have my email address - I don't want to post it on the board because of spam.
Many thanks,
Jon
I am very impressed with your workmanship. I'd be most interested in a copy of your project files. Could you send me a private message and I'll let you have my email address - I don't want to post it on the board because of spam.
Many thanks,
Jon
Any comment?
I've sent the files of my project to some gearbuilders.
Does anyone of you find better solutions to improve it?
😀
Cheers
I've sent the files of my project to some gearbuilders.
Does anyone of you find better solutions to improve it?
😀
Cheers
This is extremly good piece of work.
I think , only better mechanical solution will be older Philips transports like CDM2,3 or 4pro with swing arm system and glass optics. Or your own design with hall motor and better mech. for pick up movement.
I don´t know power supply , or other elctronics details of your design.
I think , only better mechanical solution will be older Philips transports like CDM2,3 or 4pro with swing arm system and glass optics. Or your own design with hall motor and better mech. for pick up movement.
I don´t know power supply , or other elctronics details of your design.
Roberto, did you made the SPdif cable self also?
I am interested in the same sort of sleeve you used around the cable. Want mechanically protect my diy teflon interlink cable.
I am interested in the same sort of sleeve you used around the cable. Want mechanically protect my diy teflon interlink cable.
- Hi Gasho
The lens of cdpro2m is made of glass, no plastic. The advantage of old philips gears is the limited error correction, so less interpolated samples ..but more ticks!
- tubee
I use 1 meter of Trasparent Cable 75ohm ended with two BNC 75 ohm connectors.
sorry... where did you see my spdif cable? 😕
The pictures of my cd transport don't show the digital cable.
They show the mains cable (ac plug -> external psu) and the supply cable (external psu -> cd transport).
They are both selfmade. The sleeve is from RS Components, in the italian catalogue the code is 398-486 (Cables&connectors -> Accessories -> Sleeves -> Braid).
I think it's not a good idea to diy the digital cable.
How can you strictly respect the geometry to obtain a constant impedance of 75 ohm along the cable? Maybe you're generating some reflections. Be careful!
The lens of cdpro2m is made of glass, no plastic. The advantage of old philips gears is the limited error correction, so less interpolated samples ..but more ticks!
- tubee
I use 1 meter of Trasparent Cable 75ohm ended with two BNC 75 ohm connectors.
sorry... where did you see my spdif cable? 😕
The pictures of my cd transport don't show the digital cable.
They show the mains cable (ac plug -> external psu) and the supply cable (external psu -> cd transport).
They are both selfmade. The sleeve is from RS Components, in the italian catalogue the code is 398-486 (Cables&connectors -> Accessories -> Sleeves -> Braid).
I think it's not a good idea to diy the digital cable.
How can you strictly respect the geometry to obtain a constant impedance of 75 ohm along the cable? Maybe you're generating some reflections. Be careful!
Ok Roberto, it was a power cable, sorry for that.
I found yesterday a supplier here in Holland for such cable sleeves. Have bullet plugs, silver wire also.
I found yesterday a supplier here in Holland for such cable sleeves. Have bullet plugs, silver wire also.
Alright, I was waiting for the motivation to start a project like this and here it is 😀 Could you add me to the list for the files. Helluva Good Job Man!!! THanks damiyo27@yahoo.com
Roberto,
i would be very interested to see your project
plans/schematics/pic-assemler-code
would you please send it to me my email v.calaras@ortovit.ro
kind regards
Vitali
i would be very interested to see your project
plans/schematics/pic-assemler-code
would you please send it to me my email v.calaras@ortovit.ro
kind regards
Vitali
Hi MRJAM. Since a mount I had problem with my email. I finally decided to change it and now it is working.
Please resend all the files to my new address since I never receive anything from you and you said that you already started to send the file.
Please use: bergeron.syl@videotron.qc.ca
Thanks in advance...
Please resend all the files to my new address since I never receive anything from you and you said that you already started to send the file.
Please use: bergeron.syl@videotron.qc.ca
Thanks in advance...
Hi mrjam, I as well would love to see your plans on this project. cad is o.k. or whatever you find convenient.
Bellisimo!!!
stan at stanklimekstudio dot com
Bellisimo!!!
stan at stanklimekstudio dot com
Hi all!
I sent the files to people who asked!
If someone is still waiting for them, please let me know!
Did anyone started the design of something similar? I'm courious! 😉
Stan, I tried to send the mail with the 2.6MB .zip to your adress, but I received a delivery failure message ( of course I use @ and . 😀 )
I sent the files to people who asked!
If someone is still waiting for them, please let me know!
Did anyone started the design of something similar? I'm courious! 😉
Stan, I tried to send the mail with the 2.6MB .zip to your adress, but I received a delivery failure message ( of course I use @ and . 😀 )
Hi MrJam, could you also send me the files please? My email address is hell0un1verse@gmail.com. Thank you so much🙂
Stan
It's the same account😀 😀
I already tried!! I received the follow:
- These recipients of your message have been processed by the mail server:
stan@stanklimekstudio.com; Failed; 5.5.0 (other or undefined protocol status)
Remote MTA mail.stanklimekstudio.com: SMTP diagnostic: 554 The IP Address of the sender (193.70.192.92) was found in a DNS blacklist database and was therefore refused.
Do you have another account?
Other guys have received the mail! 😕
mrjam,
send me please the plans. thank you. i will use it for the upgrade of my CDP. your work is beautiful.
send me please the plans. thank you. i will use it for the upgrade of my CDP. your work is beautiful.
- Status
- Not open for further replies.