This R.Jahre company seems to be a very serious one.
Never heard before.
But,
is there any good technical purpose for plating a cap
with Gold ?
Where would be a source to get some of those.
Samples ? 🙄
Never heard before.
But,
is there any good technical purpose for plating a cap
with Gold ?
Where would be a source to get some of those.
Samples ? 🙄
I believe the golden one was an anniversary one. I am quite sure that there is no difference but golden. I would expect the 1µF very expensive. Gold or not.
You can call Jahre directly. They also selling it.
You can call Jahre directly. They also selling it.
Ok,
killer expensive is exactly what i was afraid of.
This gold thingie is what they offer on their page.
On customers request.
Only for "beauty", or maybe for shielding purposes
out in space.....
killer expensive is exactly what i was afraid of.
This gold thingie is what they offer on their page.
On customers request.
Only for "beauty", or maybe for shielding purposes
out in space.....
There are also smaller values. like 100pf or 1nF and so on. And they are just a little sin. The sin for every day. 😀
I am in contact with Jahre. As far as i know they where on the moon.
Also the Intonation tube preamp has them inside.
The designer, Herr Milde, is a good friend of mine since 1983. "Glasperlenspiel".
Also the Intonation tube preamp has them inside.
The designer, Herr Milde, is a good friend of mine since 1983. "Glasperlenspiel".
Reliable Capacitors
This guys make the Teflon caps we use in our Spiral Goove Canalis loudspeakers.
I can talk to them if they make some caps for the Paradise.
This guys make the Teflon caps we use in our Spiral Goove Canalis loudspeakers.
I can talk to them if they make some caps for the Paradise.
This is the only company i know in Germany that makes Teflon caps under the GAD Viva brand.http://www.selectronic-kondensatoren.de/media/selectronicproduktuebersicht.pdf
We can talk to WIMA. They are in Unna, 80km from my home. I would like FKP2 in 1% with copper or silver wires.
2 times my cascode BJT of the DC coupled input stage died well into hours when doing experiments paralleling more and more jfets underneath until it was heavy for it (below 75% dissipation spec still, but gave up the ghost). After much
at Philips for killing carefully matched Toshibas downstairs, my DL103R was intact, 2 times. Jfets die gracefully indeed.