The opamp boards are here!
The MOX boards should ship to me next week.
An externally hosted image should be here but it was not working when we last tested it.
The MOX boards should ship to me next week.
Variac said:
I don't think anything has changed since the prototype boards were made. so the stuffed board should look like the ones in these pictures:
http://www.diyaudio.com/forums/showthread.php?postid=382255#post382255
--
Brian
Thanks Brian, that is exactly right. I will be posting some closeups of the discrete opamps that can be used as a stuffing guide...it is a little tricky to think about which component goes where to build up the dual opamp. (at least if you are as bad with spacial relationships as me) With the photos, it should be no problem.
And the filter module could look like this
\Jens
An externally hosted image should be here but it was not working when we last tested it.
\Jens
Great news!
The boards are in! I will be shipping orders out tomorrow afternoon.
I had not received a shipping notification so this was a bit of a surprise. Sorry for not being able to provide more notice.
If for any reason you want your order held (need more 2SK389, etc) you MUST post in this thread before 1:00PM EST (-0500).
Feel free to send an email with the details, but _please_ post in the thread because I may not get your email in time. Ed, I am holding your order already pending your instructions. More to follow but I am currently busy packaging.
The boards are in! I will be shipping orders out tomorrow afternoon.
I had not received a shipping notification so this was a bit of a surprise. Sorry for not being able to provide more notice.
If for any reason you want your order held (need more 2SK389, etc) you MUST post in this thread before 1:00PM EST (-0500).
Feel free to send an email with the details, but _please_ post in the thread because I may not get your email in time. Ed, I am holding your order already pending your instructions. More to follow but I am currently busy packaging.
Have fun!!!!
DOn't forget to provide lots of water for the envelope and stamp licking brigades
Mark
DOn't forget to provide lots of water for the envelope and stamp licking brigades
Mark
All of the U.S. orders done. About half of the internationals are fully packaged, but all have been addressed, customs forms, 2SK389, and OPA boards. Some of these unpackaged ones may ship tomorrow morning but should arrive at about the same time as those that go this afternoon.
Whew!
An externally hosted image should be here but it was not working when we last tested it.
Whew!
Just keeping this on the last page.
The boards are in! I will be shipping orders out this afternoon.
If for any reason you want your order held (need more 2SK389, boards, etc) you MUST post in this thread before 1:00PM EST (-0500).
Feel free to send an email with the details, but _please_ post in the thread because I may not get your email in time. Ed, I am holding your order already pending your instructions.[/B]
The boards are in! I will be shipping orders out this afternoon.
If for any reason you want your order held (need more 2SK389, boards, etc) you MUST post in this thread before 1:00PM EST (-0500).
Feel free to send an email with the details, but _please_ post in the thread because I may not get your email in time. Ed, I am holding your order already pending your instructions.[/B]
The packages are out! U.S. folks should have received a ship notification from Paypal. I will send an email confirming the international orders late tonight.
These orders haven't shipped:
Rodd - I'll contact you
Ed - Waiting for your email
I can't check email at work so I will respond to inquiries tonight.
I would like to congratulate Andreas on his clever order of 47.9 ounces worth of parts -- the limit on Global Priority envelopes is 48 ounces.
These orders haven't shipped:
Rodd - I'll contact you
Ed - Waiting for your email
I can't check email at work so I will respond to inquiries tonight.
I would like to congratulate Andreas on his clever order of 47.9 ounces worth of parts -- the limit on Global Priority envelopes is 48 ounces.
Hi Tyler,tiroth said:
Got your email and replied, but it was kicked back to me because it said your mailbox was full.
Change my zip to 48093, all else is correct.
Thanks
Hi all,
Was lucky enough to also be able to take part in this group buy!
Thanks Tyler and Jens for all the work put in!!
Question : When I search Mouser for the opa2134 I get the ST part back TSH22IN good enough? Or should I get the BB version?
Other good sources for the opa 2134 in Europe that do Credit Cards en private sales?
Cheers,
Bas
Was lucky enough to also be able to take part in this group buy!
Thanks Tyler and Jens for all the work put in!!
Question : When I search Mouser for the opa2134 I get the ST part back TSH22IN good enough? Or should I get the BB version?
Other good sources for the opa 2134 in Europe that do Credit Cards en private sales?
Cheers,
Bas
Opa2134
I get alot of parts from www.el-supply.dk, they also have OPA2134 from BB.
If you need help, I'll be happy to help
\Jens
I get alot of parts from www.el-supply.dk, they also have OPA2134 from BB.
If you need help, I'll be happy to help
\Jens
Thanks Jens,
Every search for
OPA 2134 or
OPA2134 gives :
EL-SUPPLY: Ingen resultater af søgning.
Der var fejl i søgningen på grund af det søgte ord eller tal findes ikke i databasen.
ANVEND STORE BOGSTAVER TIL Æ Ø OG Å !
Nogle sider har ingen varer ( 22, 71, 73, 80, 82, 84).
Prøv ny søgning med andre værdier
🙁
Cheers,
Bas
Every search for
OPA 2134 or
OPA2134 gives :
EL-SUPPLY: Ingen resultater af søgning.
Der var fejl i søgningen på grund af det søgte ord eller tal findes ikke i databasen.
ANVEND STORE BOGSTAVER TIL Æ Ø OG Å !
Nogle sider har ingen varer ( 22, 71, 73, 80, 82, 84).
Prøv ny søgning med andre værdier
🙁
Cheers,
Bas
Hello,
He he I know....but I called them not to long ago, and they said that they would get some, and they did 😉
If you want me to order some for you, just say the word.....
\Jens
He he I know....but I called them not to long ago, and they said that they would get some, and they did 😉
If you want me to order some for you, just say the word.....
\Jens
- Status
- Not open for further replies.