A-12W-K is now obsolete, Can I use RY-12W-K instead?
- https://www.mouser.kr/ProductDetail/FCL-Components/RY-12W-K?qs=pc5iSNpyspZCkKjXcqIUqw==
Thanks.
Byongho
- https://www.mouser.kr/ProductDetail/FCL-Components/RY-12W-K?qs=pc5iSNpyspZCkKjXcqIUqw==
Thanks.
Byongho
That's a different form and pinout relay. Use this one: https://gr.mouser.com/ProductDetail/KEMET/EA2-12NJ?qs=rjnFDYRVT0qLfSdrx1tU9Q==
I have to wonder why one manufacturer would have a different pinout than another. This is a straightforward product. Reminds me of the pinout on an TI4136 chip. Same mess was made with an unusual pinout. Fortunately in that case, there are adapters available.
I thought I saw B1 buffer mono boards for sale one time. Just the buffer circuit with no PSU or relays etc.. Likely they were unofficial boards!
I have great interest in such a board for certain pre and integrated amp physical layouts.. I would power it with ubib.
Any info, thoughts or suggestions would be appreciated? I have diy front end boards but haven't implemented those. Maybe this is the solution and will produce the same subjective results as B1?
I have great interest in such a board for certain pre and integrated amp physical layouts.. I would power it with ubib.
Any info, thoughts or suggestions would be appreciated? I have diy front end boards but haven't implemented those. Maybe this is the solution and will produce the same subjective results as B1?
I have few of these https://www.diyaudio.com/community/threads/dcb1-pcbs.399064/#post-7688220
Regards
Sachin
Regards
Sachin
I saw someone's build where the selector switch also lit an indicator led. Anyone have an guidance as to how that is achieved?
Shawn
Shawn
Maybe you could look into the Iron Pumkin thread for guidance there. At first, I didn't like the idea but then when I made one, it was great.
- Home
- The diyAudio Store
- Mezmerize B1 Buffer Preamp